MC-2 E-25 / 1250W/4 ohm per channel, stereo amplifier

Beschrijving

Introduction
This lightweight, switchmode amplifier has been designed to the same
high standards of reliability and sound quality that our customers have
come to expect of all MC2 Audio products.

Aimed
at the touring market in particular, the E25 at 1250W/channel into 4
ohms, built in a 2U chassis, has all the sonic qualities and
reliability of the MC and T Series amplifiers, without the physical
weight, making it an ideal choice for touring.

The
switchmode power supply is capable of delivering high peaks without any
perceptible bass ‘sag’ at very low distortion and is kept within its
safe operating area by the new sophisticated MC2 ‘intelligent’ limiter.

Features

    • Digital power supply with large power reservoir giving extremely high peak power without any bass ‘sag’.
    • MC2 proprietary current driven output stages for ultra high-definition sound.
       
    • Full high frequency power – the E25 will deliver its power over the entire audio bandwidth.
    • Lightweight aluminium construction.
    • All new, low distortion limiters with adjustable threshold points for extra speaker protection.
    • Sophisticated
      power control system linked to both the limiter and the power supply,
      keeping the amplifier within its operating limits at all times.
    • Power
      Reduction Circuit (PRC) controls on rear panel, linked to the limiter
      threshold which allow each channel to be independently set so that
      different loudspeakers can be connected to each channel with safety.
       
    • Optional cross-over cards available. 24dB/Octave Linkwitz Riley.
    • Soft start ‘power on’ with full in-rush protection.
    • Full
      DC, short circuit and thermal protection, which automatically
      reconnects when the fault is cleared. Front panel LEDs indicate fault
      condition.
    • Full 5-year warranty.

 

Output Power (Watts RMS) per channel
8 ohms @ 1kHz: 650
4 ohms @ 1kHz: 1250
2 ohms @ 1kHz:
2200
Mono Bridged:
8 ohms @ 1kHz: 2500
4 ohms @ 1kHz: 4400
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz – 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: +32dB/+26dB/+33dB
Sensitivity for rated output, 4 ohms: +7dBu/+13dBu/+3dBu (1.5V)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5dB
Input Impedance

(actively balanced):

20k ohms
Dimensions – 2U(mm): 88 x 482 x 428
Weight: 10.25kg
Power Requirement: 230 VAC @ 15.0 amps max

115 VAC @ 30.0 amps max

Extra informatie

Gewicht 12.00 kg

Merk

MC2

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “MC-2 E-25 / 1250W/4 ohm per channel, stereo amplifier” te beoordelen