dB-TECH VIO / dB Technologies VIO L208 und S118R

VIO array systemen

U bent in de markt zoekende voor een array systeem ?

U zoekt een oplossing zoekt voor een moeilijke geluids locatie?

U bent niet tevreden met de huidige geluidsweergave op uw locatie ?

Wij doen u vrijblijvend een aanbod voor vervanging, venieuwing en/of uitbreiding met DB tech systemen.

Dat kan dmv een demo op locatie, inhuur Db tech array systemen op uw evenementen of praktijk luistersessie’s met de vele systemen die in nederland draaien.

Het volledig verzorgen van uw productie met inzet van DB tech array materiaal is ook mogelijk.


https://www.production-partner.de/allgemein/dbtechnologies-vio-l212-array-fuer-touring-dimensionen/


https://www.production-partner.de/test/line-array-test-db-technologies-vio-l208-und-s118r/


Laat je deskundig voorlichten, dit zijn geen systemen die je bij een tijdelijke stunt aanbieder op marktplaats aanschaft , eentje die jaartje later niet meer bestaat….
Als ze al mogen leveren… !
De erkende dealers draaien en werken al jaren met DB tech array techniek en zij alleen kunnen alle support geven die nodig is , nu en komende jaren.


https://www.production-partner.de/allgemein/dbtechnologies-vio-l212-array-fuer-touring-dimensionen/



As a result of many years’ experience developing new solutions for powered line array systems, VIO L 210 reaches the next level among dBtechnologies’ speaker range aimed at larger sound reinforcement applications.

A unique internal acoustic design and advanced sound processing merge to deliver outstanding performances in terms of sound pressure, coverage coherence, intelligibility and sound definition.

Newly designed wooden enclosure coated with polyurea
Smooth configuration and set up operations thanks to the integrated 3-point rigging hardware

Exclusively designed waveguide for impressive throw distance
Aluminium phase plugs for an extremely coherent dispersion
Advanced DSP featuring linear phase FIR Filters for improved intelligibility
Lightweight neodymium magnetsfor all transducers
Network-ready with an integrated RDNET port


 

https://www.production-partner.de/test/line-array-test-db-technologies-vio-l208-und-s118r/

 


 

dBTechnologies VIO X310 and VIO X315

Both the VIO-X310 and VIO X-315 employ a coaxial component utilizing the same transducer of the VIO L1610 line array, a 4-inch voice coil plus 2.5-inch voice coil coaxial driver.


The MF-HF coaxial component mounted in both VIO X310 and VIO X315 utilizes the same transducer that’s deployed in the VIO L1610 line array module — a 4-inch voice coil plus 2.5-inch voice coil coaxial driver reproducing from 500 Hz and up that’s designed for durability.

The VIO-X310 delivers low frequencies using dual 10-inch woofers mounted on either side of the midrange-treble assembly in a dipole configuration, with the coaxial midrange and HF drivers placed behind a 90- by 40-degree rotatable horn. Meanwhile, the VIO-X315 has a single 15-inch woofer and the same coaxial midrange-treble drivers working with a 90- by 50-degree horn that is tilted slightly downward to optimize coverage in venues such as nightclubs and small to medium-sized halls and theatres.

The transducers are driven by dBTech’s fourth-generation DigiPro class-D four-channel amplifiers and DSP processing with dedicated FIR filters for the low, mid and high frequencies. Maximum SPL for both designs is stated to range as high as 138 dB. They are networkable via the company’s Aurora Net RDNet ports joined by a modular card slot for future I/O and remote-control upgrades. They can be flown using optional accessories and are built to stand up to outdoor use and the punishment of touring.

 

 

“We are very excited about our coaxial midrange-tweeter assembly,” says Marco Cantalù, senior applications engineer at dBTechnologies. “It allows for very high SPL but with unprecedented clarity and intelligibility, all the way down to 500 Hz where the woofer takes over. This was simply not possible in the past — not in such a lightweight and compact cabinet. If your band, venue, church, or other application was in this challenging place where a line array was too much, but conventional column speakers were too little, we think the VIO-X300 speakers may be your ‘Goldilocks’ solution and we can’t wait for you to hear them.”

dBTechnologies VIO X206 point / array speaker

Unieke speaker die in de 100 graden versie helemaal perfect is in te zetten als frontfills en centre speakers !

Wellicht een toepassing waar je zo een twee drie niet aan denkt, maar wij als praktijk bedrijf dus wel.

Kies je liever voor de passieve installatie versie hiervan, dan bied de IS26T uitkomst die deelt dezelfde waveguide n.l.

 

 

VIO X206 is an ultra-compact active professional speaker that delivers sound pressure and linear response to the highest level. Available in 2 versions with a standard 90×60° coverage or a 100×15″ dispersion pattern wich basically turns the full range speaker into a line array module


IN A CLASS OF ITS OWN

VIO X206 not only packs the best of the VIO X line’s sonic performance into an ultra-compact cabinet but also brings versatility to a new level by serving as both a point source speaker and a line array system.
The ultimate solution for complementing VIO PA systems and setting up compact high-performance stand-alone systems, meeting the requirements of both the production and integration world.
VIO X206 is equipped with 2x 6.5” neodymium transducers, and a 1” compression driver, driven by a Digipro class D 900 Watts RMS power amplifier, which, just like any other product in the VIO family, is equipped with RDNet, allowing for remote control with Aurora net software.


POINT SOURCE
AND LINE ARRAY

The system is available in 2 models providing different coverage patterns.
VIO X206 features a horn allowing for a 60×90° dispersion. VIO X206-100, instead, features a waveguide providing a 100×15°dispersion, allowing the system to operate in line array mode.
Both VIO X206 horn and VIO X206-100 waveguide are removable, meaning that users can easily replace them, adapting their VIO X206 systems to the venue and application in use.
A firmware preset button on board optimizes the behavior of the DSP to the application in use.
Thanks to the two variants it cover a wide range of applications, meeting the requirements of both production and integration. This sleek, slim cabinet can easily fits onto a live stage, a corporate event facility, as well as a meeting room or a bar.


VERSATILITY AT ITS BEST

Several brackets adapt X206 on a speaker stand (VB-2X6, SA-2X6), one of them also allows it to be flown with a C clamp (VB-2X6). A simple link plate (LP-2) is available to pair or array them. It is also possible to use 2 of the 90×60° version both flown or ground stacked with a 60° spread bracket (LP-3). An extra 60° spread bracket allows for flying or pole-mounting of up to 6 90×60° boxes side by side, with a steady angle. A U shaped bracket (HB-2X6) allows for various configurations such as wall mounting or truss mounting. The same accessory also serves as horizontal pole mount for a 90×60° X206 or multiple line array versions of X206. If you need to stash a frontfill, or if you plan to ground stack several line arrays directly on a sub, LP-5 is the perfect accessory for a safe and reliable solution to secure the load. Finally two flybars are available, a standard one for a single array (DRK-1) and a multiple one (DRK-2) that allows to fly 2 arrays of tops or subs, or even X206 and VIO S115 subs together.


 

TECHNICAL
SPECIFICATIONS

TECHNICAL DATA
Speaker Type
2 Way Active Loudspeaker
ACOUSTICAL DATA
Usable bandwidth [-10dB]
66 – 19.500 Hz / 66 – 18.000 Hz [VIO X206-100]
Frequency Response [-6dB]
70 – 18.000 Hz / 70 – 17.500 Hz [VIO X206-100]
Max SPL
131 dB
HF
1x 1”, 1.75 v.c.
LF
2x 6.5”, 1.75″ v.c
VIO X206 Directivity
60° x 90° [rotatable]
VIO X206-100 Directivity
100° x 15° [H x V]
AMPLIFIER
Amplifier
900 W RMS Class-D Digipro® G3
Cooling
Convection
Power Supply
Auto-range SMPS
PROCESSOR
Controller
DSP 32 bit
AD/DA Converter
24 bit/96 kHz
Limiter
Peak, RMS, Thermal
Processing
FIR Linear Phase Filters
INPUT
Signal Input
1 x XLR balanced, 1 x RJ45 Link (RDNet), 1x USB (Data Service)
Signal Output
1x XLR balanced, 1 x RJ45 Link (RDNet)
Power Socket
1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls
1x input Sensitivity Rotary Encoder (10x presets)
1x Horn Model Selection Switch
1x On LED
1x Status LED
1x Signal LED
1x Limiter LED
3x RDNet Status LED
MECHANICS
Housing
Wooden Cabinet, Polyurea painting
Handles
2 Integrated
Rigging points
2x M10 Threaded Nuts (top and bottom)
Width
210 mm (8.3 in)
Height
650 mm (25.6 in)
Depth
270 mm (10.6 in)
Weight
17.3 kg (38.14 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

dBTechnologies VIO X205-60 Active 2-way speaker

  • APPLICATION-FOCUSED

    VIO X205 fits any project as full-range PA, fixed installation, FOH monitoring, front-fill in large sound reinforcement systems, and more.
    This solid wooden cabinet is reinforced with a polyurea finish and features M10 threaded nuts on top and bottom allowing installation with accessories WB-VIOX205 H (horizontal bracket) or WB-VIOX205 V (vertical bracket). The cabinet can be easily installed on pole thanks to SA-VIOX205 pole mount adaptor (35mm) allowing 2 tilt options.


    DISPERSION PATTERN CONTROL

    Keeping in mind the needs of the most demanding professionals, VIO X205 is available in 2 models featuring 2 different constant directivity horns allowing a 60°x60° (for VIO X205-60) or 100°x100° (for VIO X205-100) dispersion pattern (both horizontal & vertical).


    IMPRESSIVE SOUND PRESSURE

    VIO X205 is a 2-way speaker equipped with 2×5” (1” voice coil) and 1×1” driver (1.4” voice coil). The 400 W RMS DigiproG3 amplifier powers a cabinet able to deliver up to 126 dB despite its very compact dimensions.
    Advanced sound processing featuring Linear Phase FIR Filters allows VIO X205 to deliver an extremely coherent audio performance, standing out for its intelligibility and clarity from every listening position.


    FULL CONTROL &
    SOUND QUALITY

    Just like other cabinets in the VIO X family, 205 is enabled for real time monitoring and remote control via RDNet protocol and Aurora Net software (Windows and Mac).
    The cabinet is also provided with on board controls to set High Pass Filters as well as INPUT sensitivity. On board presets let users adapt High Pass Filters to the chosen application.


2 Way Active Speaker

A revolution in VIO X family: newly born VIO X205 condenses the powerful and detailed sound of the ultimate dBTechnologies point source series into a small, ultra-performing cabinet. VIO X205 acts as the most precise and versatile unit in any tour-grade application as well as in fixed installations.

VIO X205 is a 2-way speaker equipped with 2×5 (1 voice coil) and 1×1 driver (1.4 voice coil). The 400 W RMS DigiproG3 amplifier powers a cabinet able to deliver up to 126 dB despite its very compact dimensions: only 150x 485×240 mm (WxHxD).

Advanced sound processing featuring Linear Phase FIR Filters allows VIO X205 to deliver an extremely coherent audio performance, standing out for its intelligibility and clarity from every listening position. On board presets let users adapt High Pass Filters to the chosen application.

Keeping in mind the needs of the most demanding professionals, VIO X205 is available in 2 models featuring 2 different constant directivity horns allowing a 60°x60° (for VIO X205 60) or 100°x100° (for VIO X205 100) dispersion pattern. This means that each user will be able to choose the model that best fits his project as full-range PA, fixed installation, FOH monitoring, front-fill in large sound reinforcement systems, etc.

Just like other cabinets in the VIO X family, 205 is enabled for real time monitoring and remote control via RDNet protocol and Aurora Net software (Windows and Mac).

The cabinet is also provided with on board controls to set High Pass Filters as well as INPUT sensitivity.

This solid wooden cabinet is reinforced with a polyurea finish and features M10 threaded nuts on top and bottom allowing installation with accessories WB-VIOX205 H (horizontal bracket) or WB-VIOX205 V (vertical bracket). The cabinet can be easily installed on pole thanks to SA-VIOX205 pole mount adaptor (35mm) allowing 2 tilt options. Functional cover FC VIOX 205 is also available as an accessory.

Technical Data

  • Speaker Type: 2 Way Active Loudspeaker
  • Acoustical data
  • Usable bandwidth [-10dB]: 75 – 21.000 Hz
  • Frequency Response [-6dB]: 80 – 20.000 Hz
  • Max SPL: 126 dB
  • HF: 1x 1, 1.4 v.c.
  • LF: 2x 5, 1″ v.c
  • VIO X 205-60 Directivity: 60° x 60°

Amplifier

  • Amplifier: 400 W RMS Class-D Digipro® G3
  • Cooling: Convection
  • Power Supply: Auto-range SMPS

Processor

  • Controller: DSP 28/56 bit
  • AD/DA Converter: 24 bit/48 kHz
  • Limiter: Peak, RMS, Thermal
  • Processing: FIR Linear Phase Filters

Input

  • Signal Input: 1 x XLR balanced, 1 x RJ45 Link (RDNet), 1x USB (Data Service)
  • Signal Output: 1x XLR balanced, 1 x RJ45 Link (RDNet)
  • Power Socket:
    1x PowerCON TRUE1 In
    1x PowerCON TRUE1 Out
  • Controls:
    1x Rotary Encoder (8x EQ presets)
    1x Input Attenuation Rotary Switch
    1x On LED
    1x Status LED
    1x Signal LED
    1x Limiter LED

Mechanics

  • Housing: Wooden Cabinet, Polyurea painting
  • Handles: 1x (top)
  • Wedge Angle: Monitor Use 5°
  • Rigging points: 2x M10 Threaded Nuts (top and bottom)
  • Width: 150 mm (5.9 in)
  • Height: 485 mm (19 in)
  • Depth: 240 mm (9.4 in)
  • Weight: 7.8 kg (17.2 lbs)

dB-TECH VIO-C complete series of 2-way active line-source speakers

Mail ons voor systeem offerte, system shootout op uw locatie, of demo bij importeur.
Laat je deskundig voorlichten, dit zijn geen systemen die je bij een tijdelijke stunt aanbieder op marktplaats aanschaft , eentje die een jaartje later niet meer bestaat….

Nog sterker:  ze weten niet eens wat een LINE-SOURCE systeem inhoud 😉  laat staan hoe daar mee om te gaan op uw locatie.

Als ze al mogen leveren… !

De erkende dealers draaien en werken al jaren met DB-Tech techniek en zij alleen kunnen alle support geven die nodig is , nu en de komende jaren.

Kijk bij belangstelling voor point-source systemen, zeker ook eens naar de FIFTY-LINE setup van DB-TECH.

Wij hebben n.l. met 10inch drivers (ipv 12inch) op mid-laag – mid-hoog bijzonder goede ervaringen in de praktijk.

Er mag zeker nog heel serieus worden gekeken naar de Line-source systeem, inzetbaar bij festivals, grotere zalen, vaste opstellingen en zeker in de feesttenten !

Niet altijd is een line-array hiervoor de perfecte oplossing.

Met b.v. 4x Vio 212 gestackt is perfect een stevig openlucht festival te draaien.


 

VIO line-source system

Upgrading arrayable loudspeaker concept to a brand new level, dBTechnologies proudly presents VIO C, a complete series of 2-way active line-source speakers for the widest range of venues and applications, from installed PA systems to sound reinforcement for touring.

FEATURES
  • 2-WAY ACTIVE LINE-SOURCE SPEAKERS
  • HORIZONTAL SCALABLE LINE SOURCE CLUSTER OR VERTICAL CONSTANT CURVATURE ARRAY
  • EXCLUSIVELY DESIGNED WAVEGUIDE FOR MAXIMUM HF DIRECTIVITY CONTROL
  • NEODYMIUM COMPONENTS
  • 1600W RMS DIGIPRO® G4 AMP TECHNOLOGY
  • FULL RANGE SMPS WITH PFC
  • ADVANCED DSP FEATURING LINEAR PHASE FIR FILTERS
  • FULLY NETWORKABLE VIA AURORA NET
  • OLED USER-FRIENDLY INTERFACE
  • ACCESSORIES COMPATIBLE FOR ALL MODELS


Designed to create horizontal or vertical line-source arrays and featuring a simple yet rapid rigging system, VIO C offers the most flexible coverage options as well as the powerful and pure acoustic performance that distinguishes all VIO cabinets. The series encompasses 3 enclosures housing premium neodymium components: VIO C12 (1×12”, 3.5” v.c. LF and 1×1.4”exit, 3” v.c. HF), VIO C15 (1×15”, 3.5” v.c. LF and 1×1.4” exit, 3” v.c. HF) and VIO C212 (2×12”, 3” v.c. LF and 1x 1.4”exit, 3” v.c. HF ). The whole series is equipped with latest generation 1600 W RMS Class D Amp module Digipro G4 driving a powerful DSP and allowing each system to deliver impressive SPL (139 dB for VIO C12, 140 dB for VIO C15, and 141 dB for VIO C212).

As a default, VIO C are equipped with dBTechnologies RDNet card for real time monitoring and remote control via Aurora Net software. The preamplifier is ready for future upgrades with Audinate Dante card. Featuring an exclusively designed waveguide as well as an asymmentrical horn, any single VIO C enclosure precisely provides a horizontal 22,5° angle coverage pattern. When matching companion cabinets, users can easily set up scalable horizontal clusters, adapting the VIO C to the venue and application in use. Thus, a 4-cabinet side-by-side configuration delivers a 90° horizontal dispersion, an 8-cabinet cluster reaches a 180° horizontal angle and so forth, up to a 360° coverage with a 16-cabinet set up. Infrared ports are placed on top and both sides of each cabinet so that the speakers can recognize the size and configuration of the system when linked together horizontally or vertically.

VIO C series scalability goes far beyond that. In facts, VIO C12 and VIO C15 models can also be coupled vertically, simply by turning a speaker upside down and placing it on the top of a companion speaker. The infrared ports placed on the top of the cabinets allow the two speakers to communicate and to be processed as a single unit, manageable via the on-board display or via Aurora Net software. This way, users can easily set up double-line clusters (up to 32 elements) and modify the vertical dispersion pattern via digital steering. Finally, VIO C12 and VIO C15 design also allow to create up to 4-module constant curvature arrays. VIO C clusters can be rapidly assembled thanks to the LP-1, a metal link-plug accessory (1 is included in each VIO C unit) which links the rigging points placed on the corners of each cabinet and flown via the DRK-C fly-bar for the cluster configuration – adding the DRKL-3 fly-bar link when 3 speakers are needed and the DRKL-4 for 4 speakers – and the DRK-CCA fly-bar for the constant curvature array configuration.
Enclosures are made of plywood reinforced by a black polyurea finish. A removable rain cover is included in each cabinet which is also equipped with 2 side and 2 back handles easing transport and setup.

specs:  VIO C212:

Technical Data
Speaker Type
2-Way Active Cluster Loudspeaker
Acoustical data
Usable Bandwidth [-10 dB]
46 – 19.000 Hz
Frequency Response [-6 dB]
51 – 18.000 Hz
Max SPL
141 dB
HF
1x 1.4”, 3” v.c. – Neodymium
LF
2x 12”, 3” v.c. – Neodymium
Horizontal Directivity
22.5°
Vertical Directivity
55° (+20°/-35°)
Amplifier
Amplifier
1600 W RMS Class-D Digipro® G4
Cooling
Convection, Internal fan
Power Supply
Full-range SMPS with PFC
Processor
Controller
DSP 32 bit
AD/DA Converter
24 bit/96 kHz
Limiter
Dual Active Peak, RMS, Thermal
Processing (filters)
FIR Linear Phase
Input
Signal Input
1x XLR female, balanced
Signal Output
1x XLR male, balanced
Expansion Card
RDNet Card (1x RJ45 IN 1x RJ45 Link)
Dante Card [Optional]
Power Socket
1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls
1x OLED User Interface
Special Features
IR positioning System
380V Resistant SMPS
IPOS Intelligent Power-On Sequence
Opto-isolated floating pre-amp
Inclinometer
Mechanics
Housing
Multiplex plywood – Polyurea painting
Handles
4 x handles (2 on back, 1x side)
Rain Cover
Included
Rigging Points
Corner Quick Link
Width
379 mm (14.92 in)
Height
1132 mm (44.56 in)
Depth
495 mm (19.48 in)
Weight
41.7 Kg (91.9 lbs)

dB Technologies VIO W15T the perfect touring wedge goes VIO

VIO W15T takes advantage of a coaxial design and is equipped with a neodymium coaxial component with a 15″ woofer and a 3″ driver.

The design of the horn allows a very precise dispersion pattern (60° horizontal and 80° vertical) which can be easily reversed by rotating the horn, adapting the wedge to the application needed. VIO W15T is a self powered box equipped with top notch class-D Digipro G4 amplifier delivering 1600W RMS. This is the same amp module used in our premium sound reinforcement systems. VIO W15T is able to deliver up to 137 dB SPL while offering a great feedback rejection. Moreover, the sound processing takes advantage of FIR filters in order to reproduce a very flat frequency and phase response resulting in the most faithful audio performance.
The PFC power factor corrector allows for the utmost reliability at any input voltage. A 380v resistant power supply makes the wedge shock resistant. And a real time impedance control allows for a real time check of transducers’ health.  Aurora Net software continuously runs this test, but you can check the wedge at any time, simply by pressing this button on board.
The same software also allows for DSP management such as delay, eq and levels. A hi-brightness LED bulb on the front of the enclosure, contributes to help the user to recognize, identify and match each cabinet with its software alias. As a default, the preamplifier is equipped with a RDNet card, and it is ready for upgrade to Dante card.
The preamp module is flush mounted in the side panel, so that no connector are visible. And this will definitely looks nice on a stage also thanks to the clever surrounding design of the metal grille. Furthermore, this allows for sidestacking of two wedges with no gap.
When used vertically, e.g. for drumfill applications. the preamp is completely protected from the rain.
A great versatility is granted by the addition of a multifunctional bracket, enabling the wedge for pole mounting and other kind of fixed applications.


FEATURES
  • Active 2-way Coaxial Stage monitor
  • 1600W RMS Class-D amplifier
  • Rotatable horn
  • FULL RANGE SMPS WITH PFC
  • ADVANCED DSP FEATURING LINEAR PHASE FIR FILTERS
  • MODULAR SLOT FOR NETWORK AND DIGITAL AUDIO EXPANSION CARDS (RDNET CARD INSTALLED)
  • NFC™ + FRONT LED IDENTIFICATION SYSTEM
  • SYSTEM TEST FOR QUICK TRANSDUCERS DIAGNOSTICS
  • Exclusive front-rear grille design

 

Technical Data
Speaker Type
2-Way Active Coaxial Stage Monitor
Acoustical data
Usable Bandwith [- 10 dB]
49 – 17,500 Hz
Frequency Response [- 6 dB]
55 – 16,000 Hz
Max SPL
137.5 dB
HF
1x 1.3″ – 3″ v.c. Neodymium
LF
1x 15″ – 3″ v.c. Neodymium
Directivity (HxV)
80° x 60° [rotatable]
Amplifier
Amplifier
1600 W RMS Class D Digipro® G4
Cooling
Convection + internal fan
Power Supply
Full-range SMPS with PFC (100V~-240V~, 50-60Hz)
Processor
Controller
DSP 32 bit
Converter AD/DA
24 bit/96 kHz
Limiter
Dual Active Peak, RMS, Thermal
Processing (filters)
Linear Phase FIR Filters
Input
Signal Input
1x XLR female, 1 x USB (Data Service)
Signal Output
1xXLR male
Expansion Card
RDNet Card (1x RJ45 IN 1x RJ45 Link)
Dante Card [Optional]
Power Socket
1x PowerCON TRUE1 In
1xPowerCON TRUE1 Out
Controls
1x switch Flat – service/user
1x switch System test
1x led ON
1x led STATUS
1x led SIGNAL
1x led LIMITER
1x LED TEST
1x frontal ID led
Special Features
Frontal LED Identification System
380V Resistant SMPS
Opto-isolated floating pre-amp
System Test (transducers diagnostics)
Mechanics
Housing
Wooden cabinet, Polyurea painting
Handles
1 + 2 recessions per side
Width
650 mm (25.59 in)
Height
360 mm (14.17 in)
Depth
490 mm (19.29 in)
Weight
29 kg (63.9 lbs)