LD Systems DSP 45 K 4-Channel

Beschrijving

LD Systems DSP 45 K
4-Channel Power Amplifier with DSP


The LD Systems® DSP 45 K is a professional 4-channel power amplifier with extensive DSP control. Designed for demanding large-scale sound reinforcement and concert-quality performance, it delivers a massive 1,200 watts per channel and 2 x 2,400 watts bridged. The high-efficiency Class H topology and switch mode power supply with power factor correction (PFC) provide a wide dynamic range and excellent transient response.

The DSP 45 K features comprehensive protection circuitry including power-up, DC, overcurrent, thermal and short circuit protection plus current and clip limiters to prevent SMPS overload and loudspeaker damage. Together with a pair of temperature controlled fans, they ensure exceptional reliability in the most demanding applications. The 24-bit DSP allows precise control with FIR and IIR filters, parametric EQ, crossover, delay, RMS and peak limiter functions. User configurable loudspeaker presets with password protection enable fast setup

The DSP 45 K is housed in a dual rack space all-steel chassis and weighs just 7 kg. It provides balanced Neutrik® XLR inputs, speakON® output connectors plus USB and Ethernet ports. The front panel sports a menu driven 4-line display and rotary encoder with push button switch for easy configuration. For optimal speaker performance and safe operation the DSP 45 K comes with an LD Systems® loudspeaker preset library, and the included software enables computer control and monitoring.


Specifications

General
Product type
Power Amplifiers
Type
4-channel
Rated ouput power (1kHz @ 2 Ohms)
4 x 1200 W
Rated ouput power (1kHz @ 4 Ohms)
4 x 1200 W
Rated ouput power (1kHz @ 8 Ohms)
4 x 675 W
Rated ouput power (1 kHz @ 4 Ohms, bridged)
2 x 2400 W
Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1200 W
High Z 70Vrms / 100Vpeak
4 x 1200
High Z 100Vrms / 140Vpeak
2 x 2400
Output circuitry
Class H
Frequency response
10 – 22000 Hz
Total Harmonic Distortion (THD)
< 0.05 % @ 1 kHz
Signal-to-noise ratio
104 dB
Protection circuits
clip limiter, DC protection, Multiband limiter, over-current, RMS speaker limiter, short circuit, soft start, thermal protection
Controls
Direct access buttons, Exit / lock button, knob, On / off switch
Indicators
LC display
Line inputs
4
Line input connectors
Neutrik XLR
Line outputs
4
Line output connectors
Neutrik XLR
Loudspeaker outputs
4
Speaker output connections
Speakon
Cooling
2 fans, temperature controlled
Maximum Ambient Temperature
0 – 40 °C
Operating voltage
100 V AC – 240 V AC, 50 – 60 Hz, Switching power supply
Relative Humidity
< 80% (non-condensing)
Power consumption @ full load
1900 W
Width
482 mm
Height
89 mm
Depth
320 mm
Weight
7,9 kg
Features
19″ / 2 U, Active Power Factor Correction, DSP controlled

Extra informatie

Gewicht 10 kg

Merk

LD systems

The same passion that takes hold of a musician on stage is what the engineers and designers at LD Systems® place into our products. These are not only sound technology specialists, but also sound technology enthusiasts, who passionately work out every detail until the sound and design meet the highest of standards.

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “LD Systems DSP 45 K 4-Channel” te beoordelen