Monacor DSM-48DT DIGITALE CROSSOVER

Beschrijving

Digital speaker management system, with Dante™ module.

• 4 analogue inputs and 8 analogue outputs (XLR, balanced)
• AES/EBU digital input, stereo
• 2 Dante™ channels
• 64-bit DSP, sampling rate: 96 kHz
• Dynamic range: > 118 dB
• Latency: 0.64 ms
• Routing via fader for user-defined routing of the inputs to the outputs
• Audio transmission over Ethernet via Dante™ protocol
• Graphical user interface, PC editing software (devices will be identified automatically)
• 80 user presets can be stored
• Remote control via USB or TCP/IP LAN
• Dot matrix display with 2 x 16 characters
• VU meter with 4 LEDs for each channel, level display and peak
• 482 mm (19″) rack installation, 1 RS

Input (data for each channel)

• Gain control: -48 dB to +12 dB
• 10 parametric equalizers with 8 types of filters each
• 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
• Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
• Limiter, threshold: from -48 dBu to +24 dBu
• Compressor, release time: 10 dB/s to 100 dB/s
• Mute

Output (data for each channel)

• Gain control: -48 dB to +12 dB
• 10 parametric equalizers with 8 types of filters each
• 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
• Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
• Limiter, threshold: from -48 dBu to +24 dBu
• Compressor, release time: 10 dB/s to 100 dB/s
• Mute
• Routing mix for level adjustments via routing fader
• Selectable phase (invert, 180°)