DAS Audio INTEGRAL-M26X digital signal processor »

Beschrijving

DAS AUDIO heeft een heel nieuw platform met software aansturing ontwikkeld voor de installatie markt.

Een fijne keuze naast de bestaande systemen van andere merken.

INTEGRAL series is a family of professional electronic equipment, designed and manufactured by DAS Audio, dedicated to provide complete solutions for commercial and professional installation markets, mainly based on multi-zone matrix and matrix-amplifiers with integrated multichannel DSP.

https://www.dasaudio.com/en/series/integral/

Informeer bij ons naar de mogelijkheden van dit systeem bij uw project.

The INTEGRAL-M26X, a 1U rack-mount digital signal processor, features two analogue input channels and six analogue output channels equipped with balanced XLR connectors. Its compact, cost-effective design makes it a versatile choice for live and installed PA systems.

Remote control and monitoring are possible via ALMA™ software using IP technology, or alternatively, it can be managed using external controllers through OSC messages. Direct unit control is facilitated through a 1.54″ OLED display with control buttons for basic parameters. These include input and output levels, preset recalls, mute, source selection, and link manager functions.

The device houses a complete signal processing matrix, offering gain, delay, routing, equalization, and limiters adjustment options. Its internal memory can store over 100 global presets and 200+ output channel presets, including specific presets for all DAS Audio speakers.

External control is further simplified through a General-Purpose Input / Output (GPIO) connector, providing an external 3V3 volt, GND signal, and 8 configurable pins via ALMA™software.

Electronics and Audio
Frequency Response	20 Hz-30 kHz (+0 -0.5 dB)
Max Input Level	+22 dBu
Max. Output Level	+22 dBu
Controls	Power On/Off, Navigation Buttons
Sampling Rate	48 kHz
Display	OLED 1.54″
Cooling	Side-Right-to-Left
LED Indicators	On, Comms, Signal, Limit
Power
AC Input Connector	IEC 15A
Power Supply	Universal Mains Switch Mode
Operating Range	90 – 250 VAC
DSP
Analog Input Channels	2
Analog Output Channels	6
AD Converters	24 Bit @ 48 kHz 118 dBA Dynamic Range
DA Converters	24 Bit @ 48 kHz 118 dBA Dynamic Range
Internal Precision	32 Bit, 64 Bits Double Precission
Latency	1 ms
Delay	50ms per input / 135ms per output
Equalizer	Bell, Lo/Hi-Shelving, Hos
Crossover	Linkwitz-Riley, Butterworth, Bessel
High and Low Pass Filters	Up to 48 dB/oct
Limiters	RMS
Dimensions-Weight
Dimensions ( H x W x D )	44 x 483 x 210 mm 1,7 x 19,0 x 8,3 in
Net Weight	2,5 kg ( 5,5 lb )
Shipping
Carton Dimensions ( H x W x D )	440 x 400 x 60 mm 17,3 x 15,7 x 2,4 in
Shipping Weight	4,0 kg ( 8,8 lb )