Name: Ram Audio PowerPack Modul AS 2K3 /1x 1500+750 W 4ohm
SKU: 11332
Availability: BackOrder

Ram Audio PowerPack Modul AS 2K3 /1x 1500+750 W 4ohm

Beschikbaar via nabestelling

Product toegevoegd aan de offertelijst

Beschrijving

>> Special order: Geen retour-recht ! <<

* afbeeldingen en kleur kunnen afwijken, de specs dus nooit bij RAM-AUDIO 😉

* Fully integrated DSP:

64 bit double-precision 96 kHz DSP
Minimum 0.6ms latency
Separate input and output channels.
IIR and FIR as filters up to 48dB/Oct.
10 IIR EQ per input
12 IIR EQ per output
20 FIR EQ per output (Custom: up to 2000 taps)
Limiter: RMS and Peak per output
Delay: 40m per output, or up to 40m in the input.
Smaart® Integration
20 user preset libraries
4 presets can be called up as quick-preset via button
Manufacturer/admin password
End user restrictions for in, out control and presets
Definable groups for management and warnings
Ethernet switch with two ports for daisy chain connection
USB Type B

Description:The Ram Audio PowerPack modules are the all-purpose solution for developing active loudspeakers
or t convert passive loudspeakers to active (self-powered) ones.
The modern Class-D PowerPack modules are extremely flexible to use and configure,
equipped with a lightweight switching power supply and a FIR-compatible DSP.
Like the well-known RAM Audio power amplifiers, the plate amps are also equipped with all modern
protection circuits and monitoring functions.

PowerPacks are equipped with XLR inputs including link-out,
powerCon True1 In- & Output
2x RJ45 (daisy chain) and 1x USB-B

The ASYM series are designed for the operation of medium-sized systems,
especially when the respective way have different power values.
For example in sub-satellite operation, or in 2-way loudspeaker boxes.
/> In addition, this power can be optimized for different impedances,
so that each channel can individually be choosen between 8, 4 or 2 ohm configurations.

**Output power:**
2 Ohms	750+750 W*
2,7 Ohms	1000+1000 W
4 Ohms	1500+750 W
6 Ohms	2000+530 W
8 Ohms	1500+400 W
16 Ohms	750+200 W

Brücke 16 Ohms	–
Brücke 8 Ohms	–
Brücke 6 Ohms	–
Brücke 4 Ohms	–
Brücke 2,7 Ohms	–
Brücke 2 Ohms	–

All channels controlled. IEC filtered pink noise signal (12dB crest factor).
*Limited by SSP and PMS (protection against overheating and overcurrent)

THD: <0.05%

The most important features

4 quick presets selectable via button, 20 internal presets can be saved
Display for operation, signal, limiter and clip limiter
2x RJ45 Ethernet switch for daisy chain, to control the DSP and monitoring
1x USB port for firmware updates and DSP control
powerCon True1 input and output
XLR input and output
Standby mode for remote-turn-on
Real-time impedance monitoring
Meters for input and output levels, temperature and current
64Bit/96kHz DSP with 96kHz/32 bits AD/DA converters and 2000 taps FIR
Only 0.6ms latency
Special power distribution for asymmetric loads
Latest Advanced Power Management System (PMS™)
RAM Audio ICL™ (Intelligent Clip Limiter)
Turn-On-Transients, DC, RF, overload, short circuit and overheating protection.
XLR, powerCon and Speakon connections from Neutrik®

**Data:**
Design / Type	Class D
Minimum Impedance	2	Ohms
Input Sensitivity	0,7-2,8V	V
Voltage Gain	26-38	dB (1dB seps)
Signal-to-noise Ratio	120	dB
Output Voltage	160 V/80 V	peak/CH
Output Current	30 A	peak/CH
Damping factor*	>400
Power Factor / Efficiency	>90	%
Operating Voltage	85-265	V AC (50-60Hz)
Current consumption**	1,7	A
Current consumption Idle	0,4	A
Connection – Power	1x 1x	powerCon True1 IN powerCon True1 Out
Connection – Speakers	2x	Double screw-terminals
Connection – Input	1x	XLR Female
Connection – Output	1x	XLR Male
Connection – DSP	1x 2x	USB-B RJ45
Total-Size	130x443mm
Installation -Size	100x423mm
Depth	55mm
Volume consumption	2L (With optional aluminum cover)
Weight	1,5kg

* 20-500Hz on 8 Ohms
** 1/8 Power @ 4 Ohms @ 230V. (Average at “typical” Audiosignal)

**Other features:**
DSP	Yes*
Control	USB / LAN
Digital inputs	No

Bridgeable	Yes
Parallel operation	Yes
Gain control	Via DSP / Digital
Cooling	Temperature controlled fan
Airflow	Out to Inside
LED / Display	LED -Preset -On -SGN -ICL -LIM

Limiter	RMS & Peak. PMS™, ICL™
Protection circuits	Turn-on transients, Over-heating, DC, RF, Short-circuit, mismatched loads, ICL, PMS

Extra informatie

Gewicht	5 kg

Merk

Ram-Audio

Ram-audio maakt..... versterkers.....en meer niet. En hoe !... We verkopen en verhuren dit merk al ruim 25 jaar en er staan nog steeds DQL en BUX series amps van 25 jaar geleden storingsvrij hard te werken, na vele klussen on the road , en dat zonder uitval of storingen. Helaas voor de verkoop: Ram-audio is gewoon te degelijk. Informeer via offerte aanvraag van RAM-AUDIO wel altijd naar de laatste prijs en voorraad ontwikkelingen. RAM-AUDIO wordt uitsluitend geleverd aan de prof. eindgebruikers en valt onder deze voorwaarden: Business-to-business (B2B) / zakelijke aankopen.