Ram Audio PowerPack Module SB 3K (SUB) 2 x 1500 W / 2ohm

The most important features

• 4 quick presets selectable via button, 20 internal presets can be saved
• Display for operation, signal, limiter and clip limiter
• 2x RJ45 Ethernet switch for daisy chain, to control the DSP and monitoring
• 1x USB port for firmware updates and DSP control
• powerCon True1 input and output
• XLR input and output
• 64Bit/96kHz DSP with 96kHz/32 bits AD/DA converters and 2000 taps FIR
• Only 0.6ms latency
• Special power distribution for asymmetric loads
• Latest Advanced Power Management System (PMS™)
• RAM Audio ICL™ (Intelligent Clip Limiter)
• Turn-On-Transients, DC, RF, overload, short circuit and overheating protection.
• XLR, powerCon and Speakon connections from Neutrik®

Ram Audio PowerPack Module SB 3K (SUB) 2 x 1500 W / 2ohm

• Output power:

  2 Ohm	2x	1500 W*
  2,7 Ohm	2x	1125 W
  4 Ohm	2x	750 W
  6 Ohm	2x	530 W
  8 Ohm	2x	400 W
  16 Ohm	2x	200 W
  Bridge 16 Ohm	1x	800 W
  Bridge 8 Ohm	1x	1500 W
  Bridge 6 Ohm	1x	2000 W
  Bridge 4 Ohm	1x	3000 W*
  Bridge 2,7 Ohm	1x	2000 W*
  Bridge 2 Ohm	1x	1550 W*

  All channels controlled. IEC filtered pink noise signal (12dB crest factor).
  *Limited by SSP and PMS (protection against overheating and overcurrent)

  Data:

  Design / Type	Class D
  Minimum Impedance	2	Ohms
  Input Sensitivity	0,7-2,8V	V
  Voltage Gain	26-38	dB (1dB seps)
  Signal-to-noise Ratio	120	dB
  Output Voltage	80 V	peak/CH
  Output Current	40A	peak/CH
  Damping factor*	>400
  Power Factor / Efficiency	>90	%
  Operating Voltage	85-265	V AC (50-60Hz)
  Current consumption**	3,2	A
  Current consumption Idle	0,5	A
  Connection – Power	1x 1x	powerCon True1 IN powerCon True1 Out
  Connection – Speakers	2x	Double screw-terminals
  Connection – Input	1x	XLR Female
  Connection – Output	1x	XLR Male
  Connection – DSP	1x 2x	USB-B RJ45
  Total-Size	510x175mm
  Installation -Size	490x145mm
  Depth	68mm
  Volume consumption	4,8L (With optional aluminum cover)
  Weight	2,5kg

  * 20-500Hz on 8 Ohms
  ** 1/8 Power @ 4 Ohms @ 230V. (Average at “typical” Audiosignal)

  Other features:

  DSP	Yes*
  Control	USB / LAN
  Digital inputs	No
  Bridgeable	Yes
  Parallel operation	Yes
  Gain control	Via DSP / Digital
  Cooling	Temperature controlled fan
  Airflow	Out to Inside
  LED / Display	LED -Preset -On -SGN -ICL -LIM
  Limiter	RMS & Peak. PMS™, ICL™
  Protection circuits	Turn-on transients, Over-heating, DC, RF, Short-circuit, mismatched loads, ICL, PMS

   

  * Fully integrated DSP:

  • 64 bit double-precision 96 kHz DSP
  • Minimum 0.6ms latency
  • Separate input and output channels.
  • IIR and FIR as filters up to 48dB/Oct.
  • 10 IIR EQ per input
  • 12 IIR EQ per output
  • 20 FIR EQ per output (Custom: up to 2000 taps)
  • Limiter: RMS and Peak per output
  • Delay: 40m per output, or up to 40m in the input.
  • Smaart® Integration
  • 20 user preset libraries
  • 4 presets can be called up as quick-preset via button
  • Manufacturer/admin password
  • End user restrictions for in, out control and presets
  • Definable groups for management and warnings
  • Ethernet switch with two ports for daisy chain connection
  • USB Type B

  ---