Beschrijving

Incredibly bright 1-Chip Laser-Phosphor projector for medium to large screens

The exceptionally bright single chip DLP E-Vision Laser 10K delivers an amazing 11,250 ISO lumens from a stable solid-state light source, capable of producing over 20,000 hours of illumination. In professional venues such as auditoriums and visitor Attractions that regularly contend with high levels of ambient light, the E-Vision Laser 10K brightness ensures the audience will experience the message with the saturated colors, bright imagery, and dark area detail that you or your client intended.

Equally compelling is the lack of lamp replacements due to the solid state illumination system. By bypassing regular lamp replacement cycles, almost all costs related to the E-Vision Laser are incurred at time of purchase. This key characteristic allows the E-Vision Laser 10K to have a much lower cost of ownership over the lifespan of the display.

Combine the exceptional bright, long-life illumination source with a host of other precision features, and you have a projector solution that’s perfectly suited to a diverse range of professional venues.

E-Vision Laser 10K

10,000 ANSI / 11,250 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 119-670

Key Specifications:

Colour System:

Laser Phosphor + 4-segment (RGBW) colour wheel for high brightness

Display Type:

1 x 0.67″ DarkChip™ DMD™

DMD Specification:

1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.

Aspect Ratio:

16×10

Fill Factor

87%

Key Features:

Video & Graphics Processing

HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources
Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
Synchronisation of active glasses.
3GSDI with loop-through.
24p and 1080p native display.
DICOM simulation mode.

Geometry Correction

Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Blanking control for custom input window sizing.
Scaling for fixed aspect ratio screens.

Edge Blending

For independent edge and blend width adjustment.

Picture in Picture

Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.

HDBaseT® Interface

Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows the projector to be placed up to 100m from the source with low cost cabling.

Colour Processing

Powerful seven point colour correction for accurate colour matching.

Projector Controller Software

Intuitive user interface for network control
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status

Projector Automation

Real-time clock provides daily on/off automation.

Projector Maintenance Features

Sealed optics.
Long life 20,000 hour illumination.

Source Compatibility

3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
Component Video (SD and HD) via RGBHV.

Inputs/Outputs

Video & Computer

Communication & Control

Type

Connector

Qty

Type

Connector

Qty

DVI-D 1.0
DisplayPort 1.1a
HDMI 1.4b
3G-SDI in
3G-SDI out
VGA / Analog RGB
VGA Monitor out
Component Video
HDBaseT (see LAN)

DVI
DisplayPort
HDMI
BNC
BNC
15-pin D-Sub
15-pin D-Sub
5 x BNC
LAN RJ45

1
1
2
1
1
1
1
1
1

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger
USB Power 5V/2ANOTE: The LAN port is shared with HDBase-T.

NOTE: USB Power only for WHDI interfaces.

BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A

1
1
1
1
1
2
1

3D Formats Supported

Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom

HDTV Formats Supported

1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)

Computer Compatibility

Up to 1920 x 1200

Bandwidth

165 MHz on analog RGB
165 Megapixels per second on HDMI

Remote Control

Addressable IR remote control, wireless and wired.
On-Board keypad.

Automation Control

Crestron RoomView® Connected
PJLink Class 1
LAN
RS-232
AMX (Device Discovery)
Served web page

Colour Temperature

3200 to 9300K

Operation

illumination Type

Laser Light Source

Typical illumination Life

20,000 hours

Lenses

Lens	Part No.	Lens Shift (Frame)	Optimised Focus Range*
0.38 :1 fixed	117-341	0.68m – 2.44m	Depends on image size, see Installation Guide.
0.75 – 0.93 :1 zoom	115-339	1.02m – 12.7m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
0.76 :1 fixed	112-499	0.81m – 5.08m	none
1.25 – 1.79 :1 zoom	112-500	1.33m – 11.73m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.73 – 2.27 :1 zoom	112-501	1.83m – 14.9m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
2.22 – 3.67 :1 zoom	112-502	2.36m – 24.2m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
3.58 – 5.38 :1 zoom	112-503	3.8m – 35.35m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
5.31 – 8.26 :1 zoom	112-504	5.59m – 54.8m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).

Mechanical Mounting

Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet

Orientation

Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes

Power Requirements

100-240VAC 50/60Hz single phase

Power Consumption

Typical 1215W @ 240VAC in Normal mode
Typical 960W @ 240VAC in ECO mode
Typical 1270W @ 110VAC in Normal mode
Typical 1000W @ 110VAC in ECO mode

Thermal Dissipation

Typical 4146 BTU/Hour @ 240VAC in Normal mode
Typical 3276 BTU/Hour @ 240VAC in ECO mode
Typical 4334 BTU/Hour @ 110VAC in Normal mode
Typical 3412 BTU/Hour @ 110VAC in ECO mode

Fan Noise

Normal mode: 42 dBA Typical
Eco mode: 39 dBA Typical

Operating/Storage Temperature Operating:

Operating: 0 to 40C (32 to 104F)
Operating: 40 to 45C (104 to 113F) w/ reduced light output
Storage: -20 to 60C (-4 to 140F)

Operating Humidity

10 to 90% relative, non-condensing

Weight

28 kg / 62 lbs

Dimensions

L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in

Extra informatie

Gewicht	28 kg

Merk

Digital Projection

Als we dan mogen kiezen voor een beamer & ledwall fabrikant in ons programma, dan meteen ook voor een wereldwijd A-merk. Digital Projection International manufactures & distributes an extensive line of ultra-high-performance 3-chip & single-chip DLP® projectors, along with Radiance LED – direct-view, fine-pitch LED displays. Wordt uitsluitend geleverd aan de prof. eindgebruikers en valt onder deze voorwaarden: Business-to-business (B2B) / zakelijke aankopen.