7,500 lumens of solid-state illumination at a resolution of 3840 × 2160
The E-Vision Laser 4K-UHD delivers a stunning 7,500 lumens from a stable solid-state light source, capable of producing over 20,000 hours of illumination. The 4K UHD resolution delivers stunning detail and image subtlety that only 4K-UHD powered by Texas Instruments DLP chip can. This single chip projector was developed with Fit and Forget’ directive, ensuring it needs only minimal maintenance throughout the lifetime of the display.
Equally compelling is the lack of lamp replacements due to the solid state illumination system. By bypassing regular lamp replacement cycles, almost all costs related to the E-Vision Laser are incurred at time of purchase. This key characteristic allows the E-Vision Laser 4K-UHD to have a much lower cost of ownership over the lifespan of the display.
Combine the exceptional bright, long-life illumination source with a host of other precision features, and you have a projector solution that’s perfectly suited to a diverse range of professional venues. HDMI 2.0 comes as standard as well as HDMI 1.4b for when you need Frame Sequential and Dual Pipe 3D.
E-Vision Laser 4K-UHD Black
7,000 ANSI / 7,500 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 120-608
Laser Phosphor with colourwheel
1 x 0.66″ WQXGA+ TRP UHD DMD™
Display resolutions 4K-UHD (3840 x 2160)
or WQXGA+ (2716 x 1528)
8.3 megapixels on screen at 4K-UHD
Fast transit pixels for smooth greyscale and improved contrast.
Not applicable: Smooth Picture DMD™
Video & Graphics Processing
Two projectors in one – 4K-UHD and WQXGA+.
2 x HDMI 2.0.
2 x HDMI 1.4b for Dual Pipe processing and Frame Sequential 3D format.
Sequential Processing: 3D via single HDMI 1.4b input.
Dual Pipe Processing: 3D Left and Right Eyes via two HDMI 1.4b inputs.
Blending control available for all sides with width control.
Correction for non-active pixels at the edge of the display.
Picture in Picture
Two sources can be displayed simultaneously using 2D inputs: either picture in picture (PIP), or side by side (PBP), with original aspect ratios maintained.
Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows projector to be placed up to 100m from source with low cost cabling.
Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:4:4
Four colour modes available.
Powerful seven point colour correction for accurate colour matching with presets.
Easy colour temperature selection.
Manual seven point colour adjustment.
Traditional lifts and gains.
Projector Controller Software
Intuitive user interface for network control.
Simultaneous control of user-defined groups of projectors.
At-a-glance monitoring of projector status.
Real-time clock provides daily on/off automation.
E-mail alerts for system status.
2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0) and DisplayPort inputs.
3D graphics standards up to WQXGA at 120Hz DualPipe via HDMI 1.4b inputs.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant. WQXGA+ mode
2D sources up to WQXGA+ at 120Hz can be displayed scaled to fit WQXGA+.
3D sources up to WQXGA at 120Hz can be displayed scaled to fit WQXGA+. 4K-UHD mode
2D sources up to 4K-UHD will be displayed scaled to fit 4K-UHD. Auto mode
Sources greater than WQXGA+ will be displayed scaled to fit 4K-UHD.
Sources up to WQXGA+ will be displayed scaled to fit WQXGA+.
Video & Computer
Communication & Control
DisplayPort 1.2 (2D)
HDMI 1.4b (3D)
HDMI 2.0 (2D)
3G-SDI in (2D)
HDBaseT (see LAN) (2D)
3D Sync Out
3D Sync In
3D Sync IR Out
NOTE: One of the LAN ports is shared with HDBase-T.
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
4K-UHD up to 60Hz.
WQXGA+ up to 120Hz. 3D
Supported formats will be displayed within WQXGA+.
498 megapixels per second via DisplayPort and HDMI 2.0.
Addressable IR remote control, wireless and wired.
Crestron RoomView® Connected
PJLink Class 1
AMX (Device Discovery)
Served web pages (projector status, projector control, Crestron RoomView®, network settings, alert mail setup, time setup, error log, On Screen Display)
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Operating: 5 to 40C (41 to 104F)
Storage: -10 to 60C (14 to 140F)
10 to 85% non-condensing
28.15 kg / 62 lbs
L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in
Als we dan mogen kiezen voor een beamer & ledwall fabrikant in ons programma, dan meteen ook voor een wereldwijd A-merk.
Digital Projection International manufactures & distributes an extensive line of ultra-high-performance 3-chip & single-chip DLP® projectors, along with Radiance LED – direct-view, fine-pitch LED displays.