E-Vision Laser 13000 WU – Bright just got brighter
Following on from the run-away success of the E-Vision Laser 10K, the new E-Vision Laser 13000 has been updated with all-new Colorboost + Red Laser Technology. Already renowned for being a robust, reliable workhorse, the latest generation of this compact, lamp-free projector utilises Colorboost+Red technology to create the most realistic and saturated colours ever seen from any high-brightness 1-Chip DLP Projector. With new intelligent processing, the colour performance of the E-Vision Laser 13000 is ever closer to that of a 3-Chip DLP projector.
Borrowing some of the advanced graphics processing from our flagship 3-Chip projectors, the E-Vision Laser 13000 comes as standard with HDMI 1.4b, Display Port and HDBaseT connectivity and accepts commercial and domestic 3D signals. Add to this projector automation, central control via a PC based application and Edge Blending and Geometry Correction, and this amazingly powerful and compact single chip DLP laser phosphor projector is set to be one of our most popular products.
The E-Vision Laser 13000 WU has sealed optics and uses liquid cooling with radiators to remove energy to the outside environment. The optical system, from the laser light source up to the lens is completely sealed and can be considered IP60 rated. This ensures that light output and colour performance will not be degraded due to the ingress of dust. Additionally, this projector is completely filterless as the system is liquid cooled and uses a radiator heat exchanger, minimising maintenance as no replacement or cleaning of filters is necessary and allows unrestricted airflow.
E-Vision Laser 13000 WU
12,000 ANSI / 13,500 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 120-603
Blue and Red Lasers with Phosphor wheel and 3-segment colour wheel
1 x 0.67″ DarkChip™ DMD™
1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.
Red Laser Assist
Uses blue and red laser diodes for increased colour fidelity and highly accurate colurs
Video & Graphics Processing
HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources
Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows the projector to be placed up to 100m from the source with low cost cabling.
Powerful seven point colour correction for accurate colour matching.
Projector Controller Software
Intuitive user interface for network control
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status
Real-time clock provides daily on/off automation.
Projector Maintenance Features
Long life 20,000 hour illumination.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
Component Video (SD and HD) via RGBHV.
Video & Computer
Communication & Control
VGA / Analog RGB
VGA Monitor out
HDBaseT (see LAN)
5 x BNC
3D Sync Out
3D Sync In
12V TriggerNOTE: The LAN port is shared with HDBase-T.
3.5mm Stereo Jack
3.5mm Stereo Jack
3D Formats Supported
Side By Side (half)
Top and Bottom
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Table Top or Inverted: Yes Pointing Up: Yes Pointing Down: Yes Roll (Portrait): Yes
200-240VAC 50/60Hz single phase 7.8A
100-130VAC 50/60Hz single phase 11.5A Note: that in 100-130VAC operation, the projector will be at 70% brightness
Typical 1470W @ 240VAC in Normal mode
Typical 1220W @ 240VAC in ECO mode
Typical 1510W @ 240VAC in High Altitude mode
Typical 1060W @ 110VAC in Normal mode
Typical 1050W @ 110VAC in ECO mode
Typical 1110W @ 110VAC in High Altitude mode
Typical 5016 BTU/Hour @ 240VAC in Normal mode
Typical 4163 BTU/Hour @ 240VAC in ECO mode
Typical 5152 BTU/Hour @ 240VAC in High Altitude mode
Typical 3617 BTU/Hour @ 110VAC in Normal mode
Typical 3583 BTU/Hour @ 110VAC in ECO mode
Typical 3787 BTU/Hour @ 110VAC in High Altitude mode
Normal mode: 48 dBA Max, 46 dBA Typical
Eco mode: 44 dBA Max, 42 dBA Typical
High Altitude Normal mode: 59 dBA Max, 57 dBA Typical
High Altitude Eco Mode: 59 dBA Max, 57 dBA Typical
Operating/Storage Temperature Operating:
Operating: 0 to 35C (32 to 95F)
Operating: 35 to 40C (95 to 104F) w/ reduced light output
Storage: -20 to 60C (-4 to 140F)
10 to 90% relative, non-condensing
31 kg / 68.3 lbs
L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in
Als we dan mogen kiezen voor een beamer & ledwall fabrikant in ons programma, dan meteen ook voor een wereldwijd A-merk.
Digital Projection International manufactures & distributes an extensive line of ultra-high-performance 3-chip & single-chip DLP® projectors, along with Radiance LED – direct-view, fine-pitch LED displays.