Beschrijving
- We kennen maar weinig versterkers die onder 100& 70 volt systemen kunnen werken met deze hoge vermogens.Voor grote projecten idiaal, er zijn minder versterkers nodig.DUBHE series zijn ook leverbaar met Dante of GPIO connection tegen meerprijs.
Let op: de DUBHE series zijn alleen leverbaar met Phoenix connectors voor inputs and outputs.
DUBHE Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors and output level control potentiometers in the rear panel.
In the design it has been implemented the advanced RAM Audio Power Control Management to configure how to sharing the power between between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.
These amplifiers have many configuration possibilities such as bridge mode, subsonic filter, channel power limiter and signal link, among others, in order to satisfy the needs of any particular installation. These devices also can be equipped with a GPIO connection to interface with a third party control system. Optional Dante™ Networking (AES67) and GPIO connection to interface with a third party control system are available for DUBHE amplifiers.
With all these configurations DUBHE amplifiers can meet the power requirements of any installation from 300 up to 2500 W.
Item highlights:
- Low weight high efficiency class D topology
- Universal power supply with PFC
- Up to 10000 W in 4 channels
- 8, 4 and 2 Ohm low impedance operation
- 100, 70, 50 and 35 V high impedance modes
- RAM Audio advanced Power Control Management (PCM™)
- Optional Dante™ Networking (AES67) and GPIO for third party interface
- Subsonic filter
- Signal link mini-dips configurable
- Output level control in rear panel
- Output mode configuration for high or low impedance with power limitation
- Phoenix connectors for inputs and outputs
- Up-side-down design to avoid fan dust accumulation
- Temperature controlled, front to back cooling fan
POWER TABLE DUBHE 2.5Q DUBHE 5Q DUBHE 10Q Number of channels 4 4 4 Total output power 2500 W 5000 W 10000 W Output Power* (All ch driven / single ch) 2 ohm 4x 625 / 1x 625 W 4x 1250 / 1x 1250 W 4x 2500 / 1x 2500 W 2.67 ohm 4x 625 / 1x 850 W 4x 1250 / 1x 1700 W 4x 2500 / 1x 3300 W 4 ohm 4x 625 / 1x 1250 W 4x 1250 / 1x 2500 W 4x 2500 / 1x 2500 W 8 ohm 4x 625 / 1x 1250 W 4x 1250 / 1x 1250 W 4x 1250 / 1x 1300 W 4 ohm Bridged 2x 1250 W 2x 2500 W 2x 5000 W 8 ohm Bridged 2x 1250 W 2x 2500 W 2x 5000 W Hi-Z 100V 4x 625 / 1x 1250 W 4x 1250 / 1x 2500 W 4x 2500 / 1x 2500 W Hi-Z 70V 4x 625 / 1x 1250 W 4x 1250 / 1x 1800 W 4x 2500 / 1x 2500 W DUBHE 2.5Q DUBHE 5Q DUBHE 10Q Max output voltage 150 Vpeak 150 Vpeak 150 Vpeak Max output current 25 Apeak 36 Apeak 50 Apeak Total Harmonic Distortion <0.05% Crosstalk (20Hz-1kHz), typical >70dB Voltage Gain 26dB to 44dB Signal to noise Ratio 111dB 111dB 111dB Required AC Mains Operating Voltage (50Hz-60Hz) 90V-265V AC 1/8 Rated Power (@230V, 4ohm) 2.1 A 3.7 A 7.3 A Dimensions W x H x D 483x89x342 mm – 19″x3.5″x13.5″ Weight Net 7 Kg / 15.4 Lb Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™ and PCM™.
* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor). 230V AC mains.
Beoordelingen
Er zijn nog geen beoordelingen.