KV2-Audio VHD1.0 // Mid High/ Down-fill Enclosure

Beschrijving

Featuring the same compression driver as the VHD 2.0 but on a wide angle 110? horizontal by 40? vertical horn, the VHD 1.0 Mid High / down-fill enclosure features a single 12?low mid and single 8? mid range speaker taken from the VHD 2.0. Designed to be powered as a slave from the VHD 2.0 cabinet or directly from the VHD 2000 amplifier, all equalization, set up and level are preset providing a plug and play solution for large scale touring and high quality installations. Alternatively as a stand alone box up to three VHD 1.0?s can be powered from a single VHD 2000 amplifier. Like the VHD 2.0, VHD 1.0 is available in left and right versions for downfill applications.

System Acoustic Perfomance
-3dB Response	100Hz – 22kHz
-10dB Response	85Hz – 30kHz
Full Range mode -3dB Response	65Hz – 22kHz
Max SPL Long-term	134dB (139dB two VHD 1.0’s)
Max SPL Peak	137dB (142dB two VHD 1.0’s)
Crossover Point	100Hz, 450Hz, 2.2kHz
Impedance	Low 16Ω Mid 12Ω High 16Ω
Mid/ High Horn Coverage Horizontal/ Vertical	110? x 40?
Mid Range Section
Acoustic Design	Horn loaded
Woofer Size/ Voice Coil Diameter/ Design	One 8″ / 3.0″ / Trans Coil
Diaphragm Material	Epoxy Reinforced Cellulose
Magnet Type	Neodymium
Mid/ High Horn Coverage Horizontal/ Vertical	110? x 40?
Midrange Amplifier Requirement	300W from VHD 2000
Mid-Bass Section
Acoustic Design	Horn loaded
Woofer Size/ Voice Coil Diameter/ Design	Two 12″ / 3″ / Inside Outside
Diaphragm Material	Epoxy Reinforced Cellulose
Magnet Type	Neodymium
Mid-bass Amplifier Requirement	600W from VHD 2000
Physical Dimensions
Height	660mm (25.98″)
Width	700mm (27.55″)
Depth	495mm (19.48″)
Weight	45kg (99lbs)
High Frequency Compression Driver
Throat Exit Diameter/ Diaphragm Size	1.4″ / 3.0″
Diaphragm Material	Nitride Titanium
Magnet Type	Neodymium
High Frequency Amplifier requirement	100W from VHD 2000
Rear H.F attenuation switch	-3dB for high frequency only
Speaker Input /Output
Speaker Input/ Output	Input and output EP6