18 -sound ND 1090 High Frequency Neodymium Driver (8 of 16 ohm

Categorieën: ,

Beschrijving

Key features

    • 110 dB 1W / 1m average sensitivity
    • 1 inch exit throat
    • 44 mm (1 3/4 in) edgewound aluminum voice coil
    • 100 Watt program power handling
    • Titanium dome over PEN suspension
    • Proprietary phase plug design
    • Neodymium ring magnetic structure
    • Excellent thermal exchange

 

Description

The ND1090 1 inch exit neodymium high frequency compression driver has
been designed for situations where the highest quality is required.
Equipped
with unique Phase Plug architecture, the ND1090 has been designed to
give high level manufacturing consistency and a smooth coherent
wavefront at the horn entrance across the whole working frequency
range. The phase plug short openings and high flare rate value assure
low distortion, showing remarkable improvements in mid-high frequency
reproduction.
The ND1090 diaphragm assembly is composed of a
titanium dome sandwiched to a proprietary treated polyester suspension.
This design maintains low resonance and lowers the minimum crossover
point value to 1.6kHz. An edge-wound aluminum voice coil, wound on
proprietary treated Nomex, completes the diaphragm assembly. Nomex
shows a 30% higher value of tensile elongation at a working operative
temperature (200?C) when compared to Kapton. Moreover, this proprietary
former material is also suitable for use in high moisture content
environments.
The powerful neodymium magnet assembly has been
designed to obtain 20 KGauss in the gap giving major benefits in
transient response. A copper ring on the pole piece reduces inductance
above 10 kHz, improving phase and impedance linearization. The custom
designed O-ring creates a tight seal between the plate and the cover
assuring air chamber loading. Excellent heat dissipation and thermal
exchange are guaranteed by the direct contact between the magnetic
structure and the aluminum cover which leads to a lower power
compression value.
The ability to perform properly under inclement
weather conditions is a key feature of the Eighteen Sound philosophy.
Hence, in addition, a special treatment has been applied to the magnet
and the top and back plates of the magnetic structure making the ND1090
driver more resistant to the corrosive effects of salts and
oxidization. This treatment is more effective than any other treatment
used by other manufacturers.

GENERAL SPECIFICATIONS
Throat Diameter 25,4 mm (1 in)
Rated Impedance 8 ohm
DC Resistance 5,3 Ohm
Minimum Impedance 7 Ohm at 4000Hz
Le (at 1kHz) 120 ?H
AES power (1) 50 W above 1,6 kHz
Program power (2) 100 W above 1,6 kHz
Sensitivity (1W@1m) (3) 110 dB
Frequency Range 1600Hz ? 20kHz
Recomm. Xover Frequency 1600Hz (12dB/oct slope)
Diaphragm Material Titanium – PEN
Voice Coil Diameter 44,4 mm (1 3/4 in)
Voice Coil Winding Material Edge-wound aluminum
Magnet Material Neodymium
Flux Density 2 T
BL Factor 9,1 N/A
Polarity Positive voltage on ?+? terminal gives positive pressure in the throat

 

MOUNTING INFORMATIONS
Overall diameter 93 mm (3,7 in)
Mounting holes diameter 4 M6 holes 90? at ? 76 mm (3 in)
Bolt circle diameter 76 mm (3 in)
Total depth 53 mm (2,1 in)
Net weight 1,2 Kg (2,6 lb)
Shipping weight 1,3 Kg (2,9 lb)
CardBoard Packaging dimensions 97x97x58 mm (3,8×3,8×2,3 in)

Extra informatie

Gewicht 8 kg

Merk

18-Sound

18 Sound:  voor zowel de zelfbouwer of als vervanger van merk speakers. Mail ons voor een prijsopgaaf, we kunnen onder alle duitse prijzen, maar mogen die niet op internet vermelden ;-)   .

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “18 -sound ND 1090 High Frequency Neodymium Driver (8 of 16 ohm” te beoordelen