Ecler CORE 3x3 | Transmitter unit | WiSpeak | class 1 Bluetooth®

Ecler CORE 3×3 | Transmitter unit | WiSpeak | class 1 Bluetooth® | aux out

Beschrijving

Een nieuwe visie op draadloze audiosystemen.

Als je geen kabels wilt trekken, losse (zone)versterkers wilt plaatsen of als je op zoek bent naar een flexibel geluids systeem die je kunt verplaatsen zonder bekabeling ombouwen is dit Ecler wellicht een optie voor uw bedrijf.

Standaard is elke luidspreker op een licht-rail in te schuiven en de audio wordt draadloos ontvangen.

Voor plaatsing zonder licht-rail is een verloopstuk verkrijgbaar.

De CORE is de basis (zender) van het systeem.

Met meerdere CORE zender units, kun je meerdere zone’s maken.

WiSpeak CORE is the transmitter device that communicates with all the receiver devices to create a WiSpeak wireless network, and takes the role of the Master Unit. Its main functions are to pair and send audio contents to all the receivers (TUBE, CUBE), keeping a stable communication with them, and send also individual configuration commands to each receiver if desired. It also takes care of the global configuration of the system: audio inputs in use, equalization, output levels, etc. CORE is the Master Unit of the Ecler WiSpeak system. Together with TUBE, CUBE and GLOBE, provides a simple and fast wireless installation with up to 500m2 coverage. It includes a WiSpeak grip app available for Android and iOS, which can be used for an advanced set up and fine tuning of the Wireless Pro Audio system.

External, universal Power Supply (100-240VAC 50-60Hz)
Compatible with WiSpeak grip app for set up and control functions (available for Android and iOS), using Bluetooth® connection
3 audio inputs available:
o Analogue stereo, unbalanced. 2 x RCA connectors
o Analogue stereo, balanced. 2 x Euroblock 3p connectors
o Bluetooth®, class 1 (up to 25 meters range, maximum)
1 x WiSpeak wireless audio signal transmitted (a mono conversion of the selected input)
1 x AUX OUT analogue signal available (a copy of the transmitted WiSpeak signal). It can be used for linking the unit to external audio devices, like amplifiers, mixers or subwoofer units
MUTE port, to allow the system’s audio silencing when an external dry contact is closed
REMOTE port, to allow a simple general volume control for the end user -within a programmable range- using a WPaVOL or compatible wall panel
Maximum number of receivers under control per transmitter device = 24 units. The system can be extended by linking a new transmitter to an existing receiver, creating a second WiSpeak network that shares the audio contents and Master volume with the first (main) one
Front panel controls for source (input) selection and general (Master) volume control
Recommended maximum range from a CORE transmitter to any WiSpeak paired receiver (TUBE CUBE or GLOBE): 12 meters, with direct line of sight
Front panel PAIR key: it allows pairing the receivers to the transmitter quickly and easily, for a basic set up of the WiSpeak system
Front panel LED indicators
Service USB-C port (not for external power supply, only for service updates & firmware)

WiS (RF WIRELESS DIGITAL AUDIO)

Frequency band

5.18~5.32GHz, 5.55~5.825GHz (supported worldwide)
Up to 24 non-overlapping RF channels4
DFS support

Coverage range

Up to 12m from a TX to any paired RX, direct
line of sight

Audio channels

WiSpeak CH 1&2

Audio transmission

24bit uncompressed, 48kHz SR

Digital Audio Sample size

TBC

Digital Audio Sampling rate

48kHz

Digital Audio Frequency Response

10Hz – 20kHz (-1dB)

Digital Audio converters

ADC/DAC Resolution: 24 bits
Dynamic range
ADC: 96 dB
DAC: 98 dB

Latency

From TX Analog Audio IN to TX AUX OUT <700usec
From TX Analog Audio IN to RX AUX OUT <6ms
From TX Analog Audio IN to RX Speaker <6ms

Pairing time

Up to 120s

Reconnection time

Up to 120s

ANALOGUE AUDIO INPUTS

Number of inputs

2

Connection type

IN1: 2 x RCA, unbalanced
IN2: 2 x Euroblock 2-pin, balanced

Input sensitivity

-10dBV to 0dBV

Input impedance

>20kΩ

THD + Noise

IN 1&2: <0.015%

CMRR

IN2: >60dB @ 1kHz

BLUETOOTH AUDIO INPUT

Class

Compliant 5.0, Class 1

Range

25m (ideal conditions)

Profiles

A2DP1.3/AVRCP1.6/HFP1.6/HSP1.2

Supported codecs

SBC, AAC

ANALOGUE AUDIO OUTPUTS

Number of output ports

1 x AUX OUT: Analog, Mono

Connection type

3-pin Euroblock, balanced

Output impedance

10kΩ

CONTROL CONNECTIVITY

USB

USB-C: Service & firmware updates

Analogue remote control

RJ-45: Compatible with WPa series analogue volume control panels

External MUTE

Euroblock, 2-pin, Normally Open

ELECTRICAL

Power supply

External, universal Power Supply

AC mains requirement

100-240 VAC @ 50-60Hz, using supplied DC adapter

AC mains connector

24VDC IN mains inlet

Power consumption

0.5A at 24V

MONITORING AND CONTROL

Paring control

via WiSpeak grip app./
front panel button

Source selection

via WiSpeak grip app./
front panel button

Volume control

via WiSpeak grip app./
front panel button / remote volume control

Tone control

via WiSpeak grip app.

MUTE control

via WiSpeak grip app./
GPI (External MUTE port)

LED Indicators

WiS, RX , WiS PAIR, SOURCE SELECTLEDs

Communication interfaces

APP

Processing

TBC

Programing and control

WiSpeak grip app

PHYSICAL

Installation options

Wall or under a surface (table, shelf,
cupboard, etc.)

Environmental

TBC

Enclosure material

TBC

Mounting system

TBC

Operating temperature

Min: -10°C ; 14°F
Max: 40°C ; 104°F

Operating humidity

<85% HR

Storage temperature

Min: -10°C ; 14°F
Max: 40°C ; 104°F

Storage humidity

<90% HR

Optional accessories

WPaVOL for volume control

Finished colour

White (RAL 9003) – TBC

Dimensions

225 x 120 x 40 mm / 8.9 x 4.7 x 1.6 in. (WxHxD)

Weight

0.8 kg / 1.76 lb

Pieces per box

1 unit

Shipping dimensions

510 x 60 x 210 mm / 20.07 x 2.36 x 8.27 in. (WxHxD)

Shipping weight

1.2 kg / 2.65 lb