Ecler CUBE 5″ | 2-way | 32 WRMS | WiSpeak | powered | desktop + rail mount

Categorieën: , , , Tags: , , , , , ,

Beschrijving

Een nieuwe visie op draadloze audiosystemen.

Als je geen kabels wilt trekken, losse (zone)versterkers wilt plaatsen of als je op zoek bent naar een flexibel geluids systeem die je kunt verplaatsen zonder bekabeling  ombouwen is dit Ecler wellicht een optie voor uw bedrijf.

Standaard is elke luidspreker op een licht-rail in te schuiven en de audio wordt draadloos ontvangen.

Voor plaatsing zonder licht-rail is een verloopstuk verkrijgbaar.

 


WiSpeak CUBE is a self-powered 5″ loudspeaker cabinet with wireless audio reception and control capabilities under the control of the Master unit, featuring an installation system which is compatible with ceiling light rails. Alternatively, wall mount or desktop installation is as well possible by means of the included accessories.


  • Loudspeaker cabinet style self-powered WiSpeak receiver, including 5” woofer and 1” tweeter drivers
  • Lighting rail mount included
  • Surface / wall mount accessory included
  • Universal, internal power supply, taking mains AC from the lighting rail bracket (100-240VAC 50-60Hz) or from the external AC wire (both included)
  • 1 x WiSpeak wireless audio signal received, from the transmitter it is paired to
  • 1 x AUX OUT analogue signal available (a copy of the received WiSpeak signal). It can be used for linking the unit to another WiSpeak transmitter to extend the network or to external audio devices, such as amplifiers, mixers or subwoofer units
  • Back panel UNPAIR control and front panel LED indicators
  • Available in white (RAL 9003) and black (RAL 9005)

    WiS (RF WIRELESS DIGITAL AUDIO)

    Frequency band

    5.18~5.32GHz, 5.55~5.825GHz (supported worldwide)
    Up to 24 non-overlapping RF channels
    DFS support

    Coverage range

    Up to 12m from a TX to any paired RX, direct line of sight

    Audio channels

    WiSpeak CH1 / CH2

    Audio transmission

    24bit uncompressed, 48kHz SR

    Digital Audio Sample size

    24 bits

    Digital Audio Sampling rate

    48 kHz

    Digital Audio Frequency Response

    20Hz – 20kHz (-0.1dB)

    Digital Audio converters

    DAC Resolution: 24 bit
    DAC Dynaimic range: 100dB

    Latency

    From TX IN to RX AUX OUT <6ms
    From TX IN to RX Speaker <6ms
    Jitter among receivers ±1us

    Pairing time

    Up to 120s

    Reconnection time

    Up to 120s

    SYSTEM

    Effective Freq. Range

    70 – 20kHz

    Coverage angle

    150×150 (HxV)

    Sensitivity

    83 dB (1W/1m)

    Maximum SPL

    98 dB continuous / 104 dB peak

    TRANSDUCERS

    Ways

    2 ways

    Low frequency driver

    5″ woofer

    High frequency driver

    1″ tweeter

    Nominal impedance

    8Ω

    POWERED

    Power

    32 W RMS / 128 W Peak

    Audio inputs

    CH1 / CH2: Digital, Mono, RF Wireless Audio

    Audio outputs

    Internal Loudspeaker: Analog, Mono, Self powered
    AUX OUT: Analog, Mono, Balanced, Euroblock

    THD + Noise

    <0.15% @ 1kHz Full power

    Signal Noise Ratio

    >95dB at RX AUX OUT

    Input sensitivity

    0dBV / 10kΩ

    ELECTRICAL

    Power supply

    Universal, internal power supply

    AC mains requirement

    100-240VAC @ 50-60Hz

    AC mains connector

    From lighting rail bracket, or standard 2-pin AC plug

    Power consumption

    15 W (rated)

    MONITORING AND CONTROL

    Volume control

    via WiSpeak grip app.

    Other controls

    SOLO: via WiSpeak grip app
    ID TEST SIGNAL: via WiSpeak grip app
    PAIR / UNPAIR: via WiSpeak grip app and Panel button

    LED Indicators

    WiS and STR LEDs

    Programing and control

    via WiSpeak grip app.

    PHYSICAL

    Connection type

    Standard 2-pin connector for VAC

    Installation options

    Surface, desktop, shelf, table, etc. Or in a ceiling light rail.

    Certifications

    FCC, EMC, CB

    Enclosure material

    ABS cabinet

    Grille material

    Aluminium

    Mounting system

    Lighting rail mount compatible

    Pan and tilt wall-mount

    Swivel (pan & tilt)

    Rail fixing system

    4 wire 3 circuit track system

    Compatible rail systems

    Global Trac Pro or compatibles

    Operating temperature

    Min: -10°C ; 14°F
    Max: 40°C ; 104°F

    Operating humidity

    <85% HR

    Storage temperature

    Min: -10°C ; 14°F
    Max: 40°C ; 104°F

    Storage humidity

    <90% HR

    Included accessories

    Lighting rail mount, Surface / wall mount

    Finished colour

    White (RAL 9003) or black (RAL 9005)

    Dimensions

    173 x 180 x 181 mm / 6.81 x 7.09 x 7.13 in. (WxHxD)

    Weight

    2.1 kg / 4.6 lb

    Pieces per box

    1 unit

    Shipping dimensions

    320 x 260 x 220 mm / 12.6 x 10.24 x 8.66 in. (WxHxD)

    Shipping weight

    3.2 kg / 7.05 lb

Aanvullende informatie

Gewicht 5 kg
Kleurkeuze

,

Merk

Ecler

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Ecler CUBE 5″ | 2-way | 32 WRMS | WiSpeak | powered | desktop + rail mount” te beoordelen