Ram Audio DALIM 5Q DSP 4 Channel Amplifier 4 x 1250 W

Beschrijving

De ingebouwde processing geeft je ongekend veel mogelijkheden om elk geluidssyteem optimaal in te regelen zonder externe apparatuur

en bovendien afgeschermd voor vreemden !

Je hebt als het ware een complete digitale mixer ingebouwd in je versterkers.

https://ramaudio.com/dsp_ramocs/

This Digital Signal Processor is a very versatile processor useful for any kind of sound system and configurable for any sound application possible. It is real time fully programmable directly from the front panel in the amplifiers or through Ethernet or USB by means of RAM Audio own control software, RAM_OCS.

• High performance 96kHz/24 bits AD/DA converters
• 64 bit double-precision 96kHz DSP process
• 20dBu maximum analog input
• 0.85 ms minimum process latency time
• Custom FIR process up to 1000 taps
• Dante, AES67 and AES3 input versions

DALIM Series are 4-channels high power level amplifiers designed to the tough requirements of the touring market. It is remarkable their high efficiency.

These amplifiers have been equipped with a high quality 64 bit double-precision 96kHz FIR-DSP and a large IPS display, capacitive touch panel user interface.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure through the DSP how to sharing the power between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.

Optional GPIO, Dante^TM, AES67 (ATMOS and RAVENNA compatible) and AES3 Digital inputs are available for DALIM amplifiers.

Standard Version: Standard DALIM amp is equipped with DSP (4 Inputs/4 Outputs real time fully programmable through Ethernet, USB or directly from the large frontal touch panel) and industry standard Neutrik® XLR and Speakon® connectors.

Options:

• Dante Version: Besides the DSP, this version of DALIM amps includes Dante™.

• AES67 Version (ATMOS and RAVENNA compatible): Besides the DSP, this version of DALIM amps includes digital inputs AES67.

• AES3 Input Version: Besides the DSP, this version provides standard AES3 (AES/EBU) digital inputs, at any sample rate.

• Optional GPIO: this version provides General Purpose Input Output module to interface with a third party control system. Not available in DALIM-14Q and DALIM-20Q models.

Options can be installed together.

https://ramaudio.com/products/dalim-series/

• Large IPS display, capacitive touch panel user interface

• 64 bit double-precision 96kHz DSP process. See more…

• Optional Dante^TM, AES67 (ATMOS and RAVENNA compatible) and AES3 Digital inputs

• Optional GPIO module, except for 14Q and 20Q models

• Two ports Ethernet and USB port for DSP control

• High efficiency class D topology

• Universal power supply with PFC

• Up to 20000 W in 4 channels

• 8, 4 and 2 Ohm low impedance operation

• 100, 70, 50 and 35 V high impedance modes

• RAM Audio advanced Power Control Management (PCM^TM)

• Industry standard Neutrik® XLR and Speakon® connectors

• Neutrik® PowerCon mains connector (32A version in 14Q and 20Q models)

• Removable dust filter foam

• Up-side-down design to avoid fan dust accumulation

• Temperature controlled, front to back cooling fan

Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™ and PCM™.

* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor). 230V AC mains.