Ram Audio DENEB 10Q / DSP 4 Channel Amplifier 4x2500watt

Categorieƫn: , , , Tag:

Beschrijving

We kennen maar weinig versterkers die ook onder 100& 70 volt systemen kunnen werken met deze hoge vermogens.

Voor grote projecten perfect, er zijn veelĀ  minder versterkers nodig.

DENEB series zijn de DUBHE series maar dan met DSP aan boord.

Deze ingebouwde processing geeft je ongekend veel mogelijkheden om elk geluidssyteem optimaal in te regelen zonder externe apparatuur

en bovendien afgeschermd voor vreemden !

Je hebt als het ware een complete digitale mixer ingebouwd in je versterkers.

https://ramaudio.com/dsp_ramocs/

This Digital Signal Processor is a very versatile processor useful for any kind of sound system and configurable for any sound application possible. It is real time fully programmableĀ directly from the front panel in the amplifiers or through Ethernet or USBĀ by means of RAM Audio own control software,Ā RAM_OCS.

• High performance 96kHz/24 bits AD/DA converters
• 64 bit double-precision 96kHz DSP process
• 20dBu maximum analog input
• 0.85 ms minimum process latency time
• Custom FIR process up to 1000 taps
• Dante, AES67 and AES3 input versions


tegen meerprijs:

Options:

• Dante Version:Ā Besides the DSP, this version of DENEB amps includes Danteā„¢.

• AES67 Version (ATMOS and RAVENNA compatible):Ā Besides the DSP, this version of DENEB amps includes digital inputs AES67.

• AES3 Input Version:Ā Besides the DSP, this version provides standard AES3 (AES/EBU) digital inputs, at any sample rate.

• GPIOĀ Version:Ā Besides the DSP, this version provides General Purpose Input Output module to interface with a third party control system.

Options can be installed together.

Let op:Ā  de DENEB series zijn alleen leverbaar met Phoenix connectors voor inputs and outputs.

DENEB Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure through the DSP how to sharing the power between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.
These amplifiers have been equipped with a high qualityĀ 64 bit double-precision 96kHzĀ FIR-DSPĀ and a large IPS display, capacitive touch panel user interface.

Optional DanteTM, AES67 (ATMOS and RAVENNA compatible)Ā and AES3 Digital inputs are available for DENEB amplifiers.
These devices also can be equipped with a GPIO connection to interface with a third party control system.

With all these configurations DENEB amplifiers can meet the power requirements of any installation from 300 up to 2500 W.


POWER TABLEDENEB 2.5QDENEB 5QDENEB 10Q
Number of channels444
Total output power2500 W5000 W10000 W
Output Power*Ā (All ch driven / single ch)
2 ohm4x 625 / 1x 625 W4x 1250 / 1x 1250 W4x 2500 / 1x 2500 W
2.67 ohm4x 625 / 1x 850 W4x 1250 / 1x 1700 W4x 2500 / 1x 3300 W
4 ohm4x 625 / 1x 1250 W4x 1250 / 1x 2500 W4x 2500 / 1x 2500 W
8 ohm4x 625 / 1x 1250 W4x 1250 / 1x 1250 W4x 1250 / 1x 1300 W
4 ohm Bridged2x 1250 W2x 2500 W2x 5000 W
8 ohm Bridged2x 1250 W2x 2500 W2x 5000 W
Hi-Z 100V4x 625 / 1x 1250 W4x 1250 / 1x 2500 W4x 2500 / 1x 2500 W
Hi-Z 70V4x 625 / 1x 1250 W4x 1250 / 1x 1800 W4x 2500 / 1x 2500 W

 

DENEB 2.5QDENEB 5QDENEB 10Q
Max output voltage150 Vpeak150 Vpeak150 Vpeak
Max output current25 Apeak36 Apeak50 Apeak
Total Harmonic Distortion<0.05%
CrosstalkĀ (20Hz-1kHz), typical>70dB
Voltage Gain26dB to 44dB
Signal to noise Ratio111dB111dB111dB
Required AC Mains
Operating Voltage (50Hz-60Hz)90V-265V AC
1/8 Rated Power (@230V, 4ohm)2.1 A3.7 A7.3 A
DimensionsĀ Ā W x H x D483x89x330 mm – 19″x3.5″x13″
WeightĀ Net7 Kg / 15.4 Lb

 

Protections:Ā Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICLā„¢ and PCMā„¢.

 

* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor). 230V AC mains.

Aanvullende informatie

Gewicht17 kg

Merk

Ram-Audio

Ram-audio maakt..... versterkers.....en meer niet. En hoe !... We verkopen en verhuren dit merk al ruim 25 jaar en er staan nog steeds DQL en BUX series amps van 25 jaar geleden storingsvrij hard te werken, na vele klussen on the road , en dat zonder uitval of storingen. Ram-audio is gewoon oerdegelijk.Informeer via offerte aanvraag van RAM-AUDIO wel altijd naar de laatste prijs en voorraad ontwikkelingen.RAM-AUDIO wordt geleverd aan de prof. eindgebruikers en valt onder de voorwaarden:Business-to-business (B2B) / zakelijke aankopen.

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Ram Audio DENEB 10Q / DSP 4 Channel Amplifier 4x2500watt” te beoordelen