Beschrijving
Voor grote projecten perfect, er zijn veel minder versterkers nodig.
Voor grote projecten perfect, er zijn veel minder versterkers nodig.
DENEB series zijn de DUBHE series maar dan met DSP aan boord.
tegen meerprijs:
Options:
• Dante Version: Besides the DSP, this version of DENEB amps includes Dante™.
• AES67 Version (ATMOS and RAVENNA compatible): Besides the DSP, this version of DENEB amps includes digital inputs AES67.
• AES3 Input Version: Besides the DSP, this version provides standard AES3 (AES/EBU) digital inputs, at any sample rate.
• GPIO Version: Besides the DSP, this version provides General Purpose Input Output module to interface with a third party control system.
Options can be installed together.
DENEB Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors.
In the design it has been implemented the advanced RAM Audio Power Control Management to configure through the DSP how to sharing the power between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.
These amplifiers have been equipped with a high quality 64 bit double-precision 96kHz FIR-DSP and a large IPS display, capacitive touch panel user interface.
Optional DanteTM, AES67 (ATMOS and RAVENNA compatible) and AES3 Digital inputs are available for DENEB amplifiers.
These devices also can be equipped with a GPIO connection to interface with a third party control system.
With all these configurations DENEB amplifiers can meet the power requirements of any installation from 300 up to 2500 W.
| POWER TABLE | DENEB 2.5Q | DENEB 5Q | DENEB 10Q |
| Number of channels | 4 | 4 | 4 |
| Total output power | 2500 W | 5000 W | 10000 W |
| Output Power* (All ch driven / single ch) | |||
| 2 ohm | 4x 625 / 1x 625 W | 4x 1250 / 1x 1250 W | 4x 2500 / 1x 2500 W |
| 2.67 ohm | 4x 625 / 1x 850 W | 4x 1250 / 1x 1700 W | 4x 2500 / 1x 3300 W |
| 4 ohm | 4x 625 / 1x 1250 W | 4x 1250 / 1x 2500 W | 4x 2500 / 1x 2500 W |
| 8 ohm | 4x 625 / 1x 1250 W | 4x 1250 / 1x 1250 W | 4x 1250 / 1x 1300 W |
| 4 ohm Bridged | 2x 1250 W | 2x 2500 W | 2x 5000 W |
| 8 ohm Bridged | 2x 1250 W | 2x 2500 W | 2x 5000 W |
| Hi-Z 100V | 4x 625 / 1x 1250 W | 4x 1250 / 1x 2500 W | 4x 2500 / 1x 2500 W |
| Hi-Z 70V | 4x 625 / 1x 1250 W | 4x 1250 / 1x 1800 W | 4x 2500 / 1x 2500 W |
| DENEB 2.5Q | DENEB 5Q | DENEB 10Q | |
| Max output voltage | 150 Vpeak | 150 Vpeak | 150 Vpeak |
| Max output current | 25 Apeak | 36 Apeak | 50 Apeak |
| Total Harmonic Distortion | <0.05% | ||
| Crosstalk (20Hz-1kHz), typical | >70dB | ||
| Voltage Gain | 26dB to 44dB | ||
| Signal to noise Ratio | 111dB | 111dB | 111dB |
| Required AC Mains | |||
| Operating Voltage (50Hz-60Hz) | 90V-265V AC | ||
| 1/8 Rated Power (@230V, 4ohm) | 2.1 A | 3.7 A | 7.3 A |
| Dimensions W x H x D | 483x89x330 mm – 19″x3.5″x13″ | ||
| Weight Net | 7 Kg / 15.4 Lb | ||
Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™ and PCM™.
* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor). 230V AC mains.
Beoordelingen
Er zijn nog geen beoordelingen.