XILICA XD 8080 loudspeaker management 8×8 In-Out

Beschrijving

Top Line luidspreker management controller met 8 inputs en 8 outputs op basis van Euroconnectors – Maakt gebruik van zeer precieze DSP algoritmes

– Top Notch Audio convertors

– FIR (Finite Impulse Response Lineair Phase filters (Ook wel omschreven als Brick wall filters)

– 8-Bands parametrische EQ per kanaal

– Fase correctie mogelijkheid

– 31-Bands 1/2 Octave Grafische EQ per input

– 25-Pins DB-25 aansluiting

– USB2.0 Type 2

communcatie poort – Standaard CAT-5 Ethernet aansluiting – Female
DB-9 RS-232 aansluiting – Delay tot 650ms per I/O – Variabele EQ 8 per
I/O – 30 Programma geheugens – Configuraties: Generiek, 2-weg,
3-weg, 4-weg – Display 4x 26 karakters backlit – Delay
instellen in mililseconde, voet en meter – Frequentie Modes
36steps/oct en 1Hz resolutie – Levelmeters: 5-segment LEDs – Limiters
met regelbare Threshold, Attack en release – True RMS Soft Knee limiter – Security Lock voor ieder individueel menu –

Bedieningsknoppen:
12 Mute Controls, 12 gain/Menu Controls, 6 Menu Controls, Dial Encoder
– Interne 32-bit floating point processor (96kHz) en 24 bit analoge
convertors –

Audio prestaties: Frequentiebereik: 20Hz – 30kHz, Dynamisch bereik: 115dB, CMMR: >100dB, Overspraak: < -100dB, Vervorming: 0,002%

Introducing The ACX XD Series professional matrix DSP system controllers.
Produced by the original factory and available in four different I/O configurations:
XD4080 and XD8080
24 bit AD/DA conversion and a 40 bit floating point DSP at a 96kHz sampling rate guarantee high end audio quality.
All inputs offer 650ms delay, 31-band graphic and 8 parametric EQ’s, a complete filter section (max 48dB) and a compressor.
All outputs offer 650ms delay, a 8-band parametric EQ, a complete filtersection (max 48dB) and a true RMS limiter.
The XD Series can be operated stand alone, but ultimate control can be achieved by using the supplied XConsole GUI for PC.
Connectivity over RS232, USB and Ethernet are standard. The ACX XD Series are an excellent choice among installers and live sound engineers,
looking for reliable hardware and high end audio quality.

Impendance
Input Impedance: >10k Ohms
Output Impedance: 50 Ohms
Maximum Level: +20dBu
Type: Electronically balanced

Audio Performance
Freq Response: +/- 0.1dB (20 to 30kHz)
Dynamic Range: 115 dB typ (unweighted)
CMMR: >100dB (50 to 10kHz)
Crosstalk: < -100dB
Distortion: 0.002% (1kHz @ +4dBu)

Digital Audio Performance
Processor (DSP): 40-Bit Floating Point
Sampling Rate: 96kHz
Analog Converters: Super Performance 24-bit
Propogation Delay: 1.5ms
1.75 – 7.75ms with FIR

Audio Control Parameters
Gain: -40 to +15dB in 0.25 dB steps
Polarity: +/-
Delay: Up to 650 ms per I/O

Equalisation
Variable Equalizers: 8 per I/O
Type: Parametric, Hi-shelf, Lo-self,
Phase (1st and 2nd order)
Gain: -30 to +15dB in 0.25dB steps
Bandwith: 0.02 to 2.50 Oct (Q=0.5 to 72)
Graphic EQ: 1 per Input, 31 Band 1/3 Oct steps

Crossover
2 Individual filters per I/O
Type: Butterworth, Linkwitz Riley, Bessel, FIR
Slopes: 6 to 48dB per Oct for IIR, 50 to1200 Taps for FIR

Compressors and Limiters
1 Compressor per input channel
1 Limiter per output channel
Threshold: -20 to +20dBu
Attack: 0.3 to 100ms
Release: 2 to 32x the attack time
Ratio: 1:1 to 1:40 (Compressor Only)

System Parameters
No. Of Programs: 30
Delay Units: ms, ft, m
Frequency Modes: 36 steps/Oct, 1Hz Resolution
Security locks: Password
Channel names: 6 Characters

Front Panel Controls
Display: 4×26 Characters Backlit LCD
Level meters: 5 Segment LEDs
Buttons: 12 Mute/Channel Controls
6 System Menu Controls
1 Dial Encoder

Connectors
Analog: 3-pin XLR
Digital: 25-pin DB-25 (AES/EBU)
RS-232: Female DB-9
USB: Type B
Ethernet: Standard CAT-5
Power: Standard IEC Socket

General
Power: 90-265 VAC (50/60Hz) – 20VA
Dimensions: 19”x1.75”x9” (483x44x229mm)
Weight: 10 lbs / 4.6 Kg