dB Technologies VIO W10 The ultra-slim wedge speaker

Beschrijving

Platter dan platter…. en toch een uitstekende weergave en low feedback.

Uniek design weer van DB tech.

Ding kost best een pak pegels, (vraag offerte ) maar wat een onwijs doordringende vocals geeft dit monitor(tje) , ongekend !

(hint voor perfecte montoring:  acoustic guitar, keyboards-Piano, blazers(!) )

 


This 2-way system is equipped with 4×4” neodymium HF speakers and 1×10” woofer, placed in an exclusive anti-feedback acoustic configuration. The cabinet is driven by a 400 W RMS Digipro G3 amplifier and full remote control is enabled via RD-Net and Aurora Net software.

Digital Sound Processing allow a variable acoustic focus via on-board presets or via software. As a matter of facts, user can easily adapt the wedge performance to the application in use and to the speakers’ needs, choosing among 4 different options: default, close, wide, far.

VIO W10’s wooden cabinet comes with a black polyurea finish and an exclusive front-rear-grille design which contributes to a peculiar yet discreet look, with a special attention to details. In facts, an integrated handle is hidden on left side to ease transport and a special groove carved on bottom side facilitates the passage of cables under the cabinet, allowing a clean and tidy look on stage.


FEATURES
  • Active 2-way wedge monitor
  • Innovative ultra-slim design
  • Height 165 mm only
  • 400W RMS Class-D amplifier
  • Anti-feedback acoustic configuration
  • Variable acoustic focus
  • Remote control via RDNet
  • Exclusive front-rear grille design

    VIO W10

    Technical Data
    Speaker Type2-Way Active Wedge Monitor
    Acoustical data
    Usable Bandwith [- 10 dB]58 – 15,000 Hz
    Frequency Response [- 6 dB]68 – 14,000 Hz
    Max SPL126 dB
    HF4x 4″ – 1″ v.c. Neodymium
    LF1x 10″ – 2.5″ v.c.
    Horizontal DirectivityDependent on Focus Preset
    Vertical DirectivityDependent on Focus Preset
    Amplifier
    Amplifier400 W RMS Class D Digipro® G3
    CoolingConvection
    Power SupplyAuto-range SMPS
    Processor
    ControllerDSP 28/56 bit
    Converter AD/DA24 bit/48 kHz
    LimiterPeak, RMS, Thermal
    Processing (filters)Linear Phase FIR Filters
    Input
    Signal Input1x XLR female, 1x RJ45 Link (RDNet) , 1 x USB (Data Service)
    Signal Output1xXLR male, 1x RJ45 Link (RDNet)
    Power Socket1x PowerCON TRUE1 In
    1xPowerCON TRUE1 Out
    Controls1x Rotary Encoder (8 presets)
    1 x Input Sensitivity Encoder
    1xMic /line switch
    1x On LED
    1x Status -LED
    1x Signal LED
    1x Limiter LED
    Mechanics
    HousingWooden cabinet, Polyurea painting
    Handles1 on left side
    Width450 mm (17.71 in)
    Height165 mm (6.49 in)
    Depth480 mm (18.89 in)
    Weight13.7 kg (30.20 lbs)



Extra informatie

Gewicht 12.00 kg

Merk

DB-Technologies

Vraag vrijblijvend offerte bij ons aan voor DB-TECH. Het prof. merk waar we zelf in onze dagelijkse verhuur veel van gebruiken. o.a: DVA line-array's, actieve subs, de actieve speakers en versterkers. We doen vrijwel al ons verhuur werk met DB-TECH uitvoeren ;-)

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “dB Technologies VIO W10 The ultra-slim wedge speaker” te beoordelen