Versatile and compact with flexible fixed lens

The E-Vision LASER 5900 is a compact and powerful single-chip DLP projector, engineered with the same dependable technology found in all of Digital Projection’s large screen display projectors. Featuring our proven solid-state laser illumination technology, the E-Vision LASER 5900 offers 20,000-hours of stable and near maintenance free imaging performance.

The E-Vision LASER 5900 is suited for applications requiring a bright and dependable solution while meeting prudent budgetary requirements. Being laser illuminated, there are never any lamps to replace, so long-term cost of ownership is near zero. Further, brightness maintenance is long and predictable, assuring system operation is never interrupted. Adding to the powerful benefits of laser illumination, Digital Projection’s MultiAxis capability allows the E-Vision LASER 5900 to be oriented in nearly any position for installation flexibility and application creativity.

To assure simplicity, the E-Vision LASER 5900 includes a standard zoom lens and a multitude of connectivity options. The E-Vision LASER 5900 serves as a flexible imaging tool for large screen applications requiring a bright, dependable & quiet solution from a compact, low-cost package.

Key Specifications:

Colour System: Laser Phosphor Display Type: 1 x 0.67″ DarkChip™ DMD™ DMD Specification: 1920 x 1200 pixels native resolution. Fast transit pixels for smooth greyscale and improved contrast. Aspect Ratio: 16×10 Fill Factor Key Features: Video & Graphics Processing HDMI 1.4a for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats. Synchronisation of active 3D glasses. DICOM simulation mode. Mobile High-Definition Link (MHL™) connection allows mirrored content from smartphones, tablets and other portable consumer electronics devices. Geometry Correction Vertical & Horizontal Keystone correction (2D: Vertical ±30°, Horizontal±30°). Four Corner adjustment. Selectable 16:9, 4:3, Native, Letterbox and Full Screen aspect ratios. Digital Zoom +10~-10. HDBaseT® Interface Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable. Allows the projector to be placed up to 100m from the source with low cost cabling. HDBaseT® includes audio, Ethernet 100BaseT and RS232/IR control. Colour Processing 2 x speed, 3 Segment (GBY) Phosphor wheel. 2 x 120Hz speed, 4 Segment (RGBY) Colour wheel. 10-bit colour display. Powerful seven point colour correction for accurate colour matching. Source Compatibility Graphics standards up to 1920 x 1200 resolution at 60Hz. Input support for 4K-UHD, 3840 x 2160 and 4096 x 2160 at 60 Hz. Inputs/Outputs Video & Computer Communication & Control Type Connector Qty Type Connector Qty HDMI 1.4a HDMI 1.4a + MHL VGA / Analog RGB VGA / Monitor Out Composite Video HDBaseT USB Type A / (5V/1.5A) NOTE: The USB is to power WHDI™ interfaces. Audio: Audio IN L+R Audio IN L+R Mic IN Audio OUT (variable) Speakers HDMI HDMI 15-pin D-Sub 15-pin D-Sub RCA RJ45 USB Type A Phono 3.5 mm jack 3.5 mm jack 3.5 mm jack 5W speaker 2 1 1 1 1 1 1 2 1 1 1 2 LAN RS-232C USB (for Service) 3D Sync Out NOTE: The HDBaseT and LAN ports are not shared. RJ45 9-pin D-sub Mini B VESA 3-PIN mini DIN 1 1 1 1 3D Formats Supported Frame Packing Frame Sequential Side By Side (half) Top and Bottom HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz) Computer Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA@60hz Bandwidth Remote Control IR remote control, 2 x IR receivers (front sensitivity up to 7m, rear sensitivity up to 10m) Automation Control LAN control – Crestron RoomView® Connected LAN control – Crestron eControl LAN control – Extron LAN control – AMX SSDP LAN control to RS232 by Telnet HDBaseT communication Projector status email alerts PJ Link (Class1) Colour Temperature Warm / Normal / Cold Operation illumination Type Laser Light Source Typical illumination Life 20,000 hours Lenses Lens Part No. Lens Shift (Frame) Optimised Focus Range* 1.15 – 1.9:1 N/A 1.5m – 10.0m Vert: Fixed Offset 0.65 (U) frame with small variable vertical and horizontal shift * Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%, Lens Mount Manual focus Mechanical Mounting Front/Rear Front/Rear Ceiling Two adjustable front feet, 10° (43mm) Ceiling Mount compatible chassis with 7 off M4 mounting holes Orientation Table Top or Inverted: Yes Pointing Up:        Yes Pointing Down:   Yes Roll (Portrait):      Yes Power Requirements 100-240VAC 50/60Hz single phase Power Consumption Normal Mode (100%) 480W @230V 500W @110V Eco Mode (80%) 355W @230V 365W @110V Thermal Dissipation Normal Mode (typical): 1706 BTU/Hour @ 110VAC 1638 BTU/Hour @ 230VAC Fan Noise Normal Mode Typ: 36 dBA / Max: 38 dBA Operating/Storage Temperature Operating: Operating: 0° to 40°C (32F to 104F) Storage: -20° to 60°C (-4F to 140F) Operating Humidity 10 to 85% non-condensing Weight 10.5 kg / 23.21 lbs Dimensions L: 44.56 cm W: 36.0 cm H: 16.35 cm L: 17.54 in W: 14.17 in H: 6.43 in