Signet PDA5/SD 200M² pro ringleiding versterker met XLR mic/line in

Categorie: Tag:

Beschrijving

 

Alle ringleiding materiaal wordt speciaal besteld en u heeft geen teruggaaf recht op deze artikelen.


  • Supply Voltage: 230V ∿ 50Hz (Free-standing model is supplied with IEC 320 fused mains lead; Wall-mount
    model is permanently connected to mains)
    Power Consumption: 100W / 200W / 400W (model dependent)
    INPUTS
    Line In: Input impedance: 1k + or – input to ground.
    Sensitivity: -20dBU typical.
    Microphone:
    Input impedance: 1k + or – input to ground.
    Sensitivity: -42dBU typical.
    Phantom power for electret microphones: 12V selectable (on/off).
    Outreach:
    Input impedance: >10k.
    Sensitivity: 0dBU typical.
    Outreach power: 24V d.c. nom. is available via the amplifier’s outreach connector (100mA max.)
    Optical (if fitted): TOSLink digital receiver. Up to 24 bit, 96kHz sampling.
    OUTPUTS
    Loop 1 &
    Loop 2 (if fitted):
    Type: True current mode. Loop output voltage: 14V.
    Single Loop drive current @ 1 ohm: 4.75A (PDA5/SD, PDA5/SW); 7.5A (PDA7/SD, PDA7/SW); 11A
    (PDA11/SD, PDA11/SW).
    Dual Loop drive current @ 1 ohm: 2 x 3.25A (PDA5/DD, PDA5/DW); 2 x 5A (PDA7/DD,
    PDA7/DW); 2 x 7.5A (PDA11/DD, PDA11/DW).
    Line Out: 775mV output
    Fault Relay: Single pole double throw (SPDT): NC, Common, NO.
    Phase Shift (if fitted): 2 x 900 phase shifted. Selectable (on/off).
    Metal Compensation: Up to 10dB / octave design counteracts frequency dependent absorption by metal in the
    installation over a bandwidth of approximately 5kHz.
    COVERAGE
    Maximum Coverage Area:
    200m2, i.e. rooms up to approx. 14m x 14m (PDA5/DD, PDA5/DW).
    500m2,
    , i.e. rooms up to approx. 22m x 22m (PDA7/DD, PDA7/DW).
    1000m2, i.e. rooms up to approx. 31m x 31m (PDA11/DD, PDA11/DW).
    Loop impedance: 0.5 to 2 ohm.
    PERFORMANCE
    Frequency Response (-3dB): 100Hz to 5kHz; Distortion: Less than 1 % typical; Signal to Noise Ratio: Better than –65dB any
    input; AGC Range (3dB change in output voltage current): 10dB. AGC ratio: 20:1.
    SUPPLEMENTARY
    Sensitivity Level Controls
    (lockable):
    Line Input, Microphone, 12V Phantom, Outreach, Metal Comp, Loop Drive 1, Loop Drive 2 (if
    fitted), Phase Shift (if fitted).
    Display & Controls: LED display with 4 membrane control buttons.
    Connectors:
    • Microphone (3-pin XLR Type – Free-standing model; 3-way pluggable connector – Wall-mount model).
    • Line In (3-pin XLR Type – Free-standing model; 3-way connector – Wall-mount model).
    • Loop (2 or 4 way binding post – Free-standing model; 2 or 4-way connector – Wall-mount model).
    • Outreach (4-way pluggable connector).
    • Line Out (3-way pluggable connector).
    • Fault Relay (3-way pluggable connector).
    • Optical (if fitted).
    • 230Va.c. connector (Mains lead supplied for Free-standing model; Fixed mains connection
    for Wall-mount model).
    Overall Dims. (H x W x D): Free-standing models: 67mm (H) x 218mm (W) x 280mm (D)
    Wall-mount models: 298mm (H) x 308mm (W) x 74mm (D)
    Weight: Free-standing models: 2.38kg; Wall-mount models: 3.35kg
    Panel Construction: Mild steel zintec, 1mm thick, black powder coated IP Rating (EN 60529): IP40
    Operating Temperature: 00
    C to 400
    C Maximum Humidity: 95% non-condensing

Extra informatie

Gewicht 8.00 kg

Merk

Current Thinking / Signet

De prof. merken voor alle ringleiding systemen. Laat je deskundig voorlichten door ons voor een ringleiding, het is specialisten werk.

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Signet PDA5/SD 200M² pro ringleiding versterker met XLR mic/line in” te beoordelen